Operation, VGA Setting, Audio menu | Haier LE50F2280 specification

OPERATION

In this menu,you can adjust the picture options here,

such as contrast, brightness, etc.

Press to select, press ENTER to adjust.

Note:

1)If you want to adjust contrast, brightness, color, and sharpness, the picture mode must be set to personal.

2)This will increase or decrease Warm (red) and Cool (blue) colors to suit your personal preference.

Select Cool to give the white colors a blue tint, Normal to give the white colors a neutral tint, Warm to give the white colors a red tint.

Standard mode is the default setting, if you select some other options, the power consumption may change.

When a PC is connected, you can adjust the VGA settings.

1)H-Pos: Adjust the horizontal position of the screen.

2)V-Pos: Adjust the vertical position of the screen.

3)Clock: Fine tune the screen width.

4)Phase: Fine tune the phase of the screen. Usually you don't adjust this item.

5)Auto: Auto adjust to fit the screen.

In this menu, you can ajust the sound options here.

Press to select, press ENTER to adjust.

Note:

1)Audio language is available in ATSC/TVmode only.

2)Auto volume is available only when the input signal volume is too large or there is distortion.

In this menu, you can adjust the Menu language, Closed Caption, adjust the sleep timer, time zone, Restore Default, etc.

Press to select, press ENTER to adjust.

CC Mode

CC On

Basic Selection CC1

Advanced Selection Servicel

Option

Enter

1)CC Mode: Switch the closed caption mode.

2)Advanced selection: only available in ATSC.

3)Option: Used to edit the CC font.

Note:

1)Restore Default: Restore Default will clear all the programs and reset all the settings to default value.

Picture

Audio

Setup

Lock

MENU Back	Move ENTER OK

-11-