Troubleshooting, Problem Possible remedies | Haier L40A9-AD instruction

Troubleshooting

For the sake of time and cost, it is strongly recommended that you check out the problem by yourself according to the instructions listed hereunder before contacting the after-sales service for technical assistance.

	Problem	Possible remedies

		Turn on the power supply;
	No picture,	Properly plug the TV set to the power socket;
	no sound	Check to see if the power cable of other appliance is
		plugged in the TV set. Make sure that the power cable
		of the TV set is properly connected.

	Good picture,	Depress the volume button;
	no sound	Check out the audio frequency input signals.

	Failure of remote	Check to see if the remote controller display
	Failure of remote	receiving window are blocked by other objects and
	controller	receiving window are blocked by other objects and
	controller	if batteries are properly loaded.
		if batteries are properly loaded.

	No color, weak	Designate the item of color from the Picture menu
	No color, weak	and depress the volume button;
	color or poor picture	and depress the volume button;
	color or poor picture	Keep the display and VCR separate a reasonable space;
		Keep the display and VCR separate a reasonable space;
		Activate some functions to store picture brightness;
		Make sure that the display and signal source are
		available and turned on.

	Excessive brightness	Adjust brightness or contrast.
	or darkness	Adjust brightness or contrast.
	or darkness

	Picture too big or small	Adjust the setup of sizes.
	One speaker failure	Balance the sound in the menu.
	Slight sound from display	It is a normal phenomenon.

Note: Do not leave the television with static picture in an extended period as it may result in residual image on your television screen.

Note: Production of the screen requires high and precision technologies. However, there might be some dark or bright (red, blue or green) spots, or some anomalistic stripes or spots. This is not defect. If the TV set is used in an area 2,400 meters above the sea level where the air pressure is below 750hpa, the picture on the screen may be affected and a muffled sound might be produced. These phenomena might happen in the area 1,500 meters above the sea level. This is resulted from difference between air pressures inside and outside the display. This is not a defect covered by the limited warranty.

NOTE

Design and specifications are subject to change without notice.

The dimension in this manual is a approximation.

L40A9-AD specifications

The Haier L40A9-AD is a versatile and innovative air conditioning unit designed to provide optimum cooling and comfort for residential and light commercial environments. With its modern design and advanced technologies, the L40A9-AD stands out in the competitive air conditioning market.

One of the main features of the Haier L40A9-AD is its energy efficiency, which is supported by its inverter technology. This feature allows the unit to adjust the compressor speed based on the cooling demand, resulting in lower energy consumption compared to traditional air conditioners. This not only helps in reducing electricity bills but also minimizes environmental impact.

The cooling capacity of the Haier L40A9-AD is impressive, making it suitable for medium-sized rooms. It has an elegant design that blends seamlessly with contemporary interiors. The sleek outdoor unit is designed for durability and quiet operation, contributing to a more pleasant living environment.

Another significant characteristic of the L40A9-AD is its advanced air purification system. The unit includes a multi-stage filtration mechanism that helps to remove allergens, dust, and other airborne particles, ensuring healthier indoor air quality. The technology also incorporates an anti-bacterial filter, which works to inhibit the growth of harmful microbes.

The Haier L40A9-AD features a user-friendly interface, equipped with a remote control that allows for easy adjustment of settings from anywhere in the room. The intuitive display shows operational status and temperature settings, contributing to an enhanced user experience.

In terms of installation and maintenance, the L40A9-AD is designed for straightforward setup, allowing users to enjoy its cooling benefits with minimal hassle. The unit also comes with self-diagnostic capabilities that alert users to any malfunctions or required maintenance, helping to prolong its lifespan.

Overall, the Haier L40A9-AD is a state-of-the-art air conditioning unit that unites energy efficiency, modern technology, and user-friendly features. It provides effective cooling solutions while promoting a healthier indoor environment, making it a smart investment for those seeking comfort and reliability in their air conditioning needs.