Other functions
NICAM
If the broadcaster is transmitting Bilingual sound service. The 
/ 
button on the remote controller will allow up to 2 separate languages to be selected. You can press the 
/ 
button to make a choice.
Display function
If current program number, color system and sound system are to be displayed on the screen, press DISPLAY button, and all the related information will appear at right up corner of the screen.
If the DISPLAY button is pressed again, the displayed information will disappear.
(If the program is named, its name will also appear ).
3
AUTO
B/G
Auto program scan
1 If you want to select a desirable program, you may scan all the TV programs in memory. You can simplypress SCAN button to do this. Press scan buttononce, there arenine pictures onthe screen.
2 If you want to stop the function during auto tunning, simply press SCAN button again.
Sleep
The TV set will switch automatically to standby at the preset time with the SLEEP time on. You may set the sleep time,
Operate as follows:
1 Press SLEEP button repeatedly to select the number of preset minutes, the timer will be set in sequence:
0Min
5Min
15Min
30Min
60Min
90Min
120Min
0Min
Note: If the Off time on the TIMER menu is set, when press first SLEEP button,
the remaining time will display on the screen.
2After the sleep time is set, the Indication will appear on the screen
1minute prior to expiry of set time.
3 If remaining time of set timer is to be displayed, press SLEEP button again. The TV set will switch off automatically at the preset time, press CH+/- button to turn on again.
4 If to cancel sleep time, press SLEEP button repeatedly to set as 0.
Picture Still
Note:
The Time On setup and the SLEEP setup
is absolute one
another.
Press Still button, the picture will be still; if to cancel, press Still button again, the picture will resume.