Audio Set Up:
By pressing MENU button ,and then pressing VOL(-/+) button it will bring you to Audio Set Up display. You will see the following menu on your TV screen:
Follow the procedure below to adjust the sound quality:
Press VOL (+) button to increase and VOL (-)button to decrease the level to your preference.
Timer Set Up:
By pressing MENU button ,and then pressing VOL(-/+) button it will bring you to Timer Set Up display. You will see the following menu on your TV screen:
Timer | |
Clock | 17:18 |
Time-on | 18:00 |
Ch. Select | 1 |
Time-off | --:-- |
Sleep Time | 0 |
Remind Time | --:-- |
Ch. Switch | 1 |
Follow the procedure below to select one of the above options: 1.Press the CH(+) and CH(-) button to go up and down the menu. 2.Press VOL (+) button or VOL (-) button to select your preference.
Clock: Press CH( +/-) buttons to scroll to Clock, then press VOL (-/+) buttons to set the hour after setting the hour press CH( +/-) buttons to go to minute mode and set by using VOL(+/-) buttons.
Time-On: Press CH( +/-) buttons to scroll to Clock, then press VOL (-/+) buttons to set the hour after setting the hour press CH( +/-) buttons to go to minute mode and set by using VOL(+/-) buttons.
Ch. Select: This exclusive feature switches you to your favorite channel at the appropriate set time. Press VOL(+) and VOL(-) buttons to select the channel.
Time-Off : Press CH( +/-) buttons to scroll to Clock, then press VOL (-/+) buttons to set the hour after setting the hour press CH( +/-) buttons to go to minute mode and et by using VOL(+/-) buttons.
Sleep Time: This feature allows you to turn off television in pre-selected minutes (180, 170,160, ........,10 and 0).
Remind time: Press CH( +/-) buttons to scroll to Clock, then press VOL (-/+) buttons to set the hour after setting the hour press CH( +/-) buttons to go to minute mode and set by using VOL(+/-) buttons.
Ch. Switch: This feature lets you store your favorite channel. Once you store the channel number in this function, when the set time is up, it will switch over to the set channel. This feature is used with the Exchange feature. Press VOL(+) or VOL(-) button to select the channel.
