Controls, Care and Maintenance, Safety Tips

WARNINGS:

This TV monitor should be operated only at the adaptor supplied.

Do not try to repair the TV monitor yourself as it contains no user-serviceable parts. The TV monitor should only be repaired by a qualified technician.

Stop using the TV monitor if the cabinet is damaged. Have it checked by a service technician.

Put your monitor only in a clean, dry environment. Unplug the monitor immediately if it gets wet, and consult your service technician.

Always unplug the monitor before cleaning it. Clean the cabinet with a clean, dry cloth. Apply non-ammonia-based cleaner onto the cloth, not directly onto the glass screen.

Keep the TV monitor away from magnetic objects, motors, TV sets, and transformers.

Do not place heavy objects on the cable or power cord.

Care and Maintenance

Avoid exposing your monitor directly to sunlight or other heat sources. Place your TV monitor away from the sun to reduce glare.

Put your TV monitor in a well-ventilated area. Do not place anything heavy on top of your monitor.

Make certain that your TV monitor is installed in a clean and moisture-free area.

Safety Tips

If smoke, abnormal noise or odor comes out of your TV monitor, switch off the power immediately and call your service center.

Never try to repair the TV monitor yourself. Always call your service center or a qualified technician to fix it.

Do not watch during driving, it is dangerous and is illegal!

Note

This user's manual contains graphics and information that is for reference purposes only and is subject to change without notice.

Power requirements

You may use the DC adaptor or the Cigarette lighter adaptor (NEGATIVE GROUND ONLY) supplied for the power source.

Battery installation

Attach the rechargeable battery pack to the bottom of the TV Player unit as illustrated below:

BATTERY

BATTERY COVER

NOTE:

This unit works either on the battery pack supplied or on DC power: unplug the DC Power adapter from the DC input jack to run off the battery pack (after fully charged); plugging the DC Power adapter while the battery pack is attached initiates the charging of this battery. Please insert the battery correctly. Generally, it takes about 6 hours to charge a dead battery pack full. A full charged battery pack can endure approximately 2 hours of continuous playback.

Controls

3 4 5 6 7 8 9 10 11 12 13

		14
		15
		16
		17
	1	18
	2	18
	2

1.Power on/off switch

2.DC input jack

3.LCD display

4.Speaker

5.Standby/Power indicator

6.Menu

7.Channel -

8.Channel +

9.Auto/OK

10.Volume - ( right key in menu function)

11.Volume + ( left key in menu function)

12.Mode

13.Remote control sensor

14.RF in

15.Video in jack

16.Audio left in jack

17.Audio right in jack

18.Phones jack

19.Self-support Bracket

20.Battery compartment