Haier P42S6A-C2 owner manual DVD setup, DTV setup

External Equipment Connections

DVD setup

How to connect

1. Connect the DVD video outputs (Y, Pb/Cb, Pr/Cr) to the COMPONENT (Y, Pb/Cb, Pr/Cr) INPUT jacks on the TV and connect the DVD audio outputs to the AUDIO INPUT jacks on the TV, as shown in the figure.

2. If your DVD only has an S-Video output jack, connect this to the S-VIDEO input on the TV and Connect the DVD audio outputs to the AUDIO INPUT jacks on the TV, as shown in the figure.

NOTE: If your DVD player does not have component video output, use S-Video.

How to use

1. Turn on the DVD player, insert a DVD.

2. Use the S-Video button on the remote control to select S-VIDEO mode.

3. Press Play button on external equipment for program play.

4. Refer to the DVD player's manual for operating instructions.

COMPONENT

					L	L
L-AUDIO-R	Y	Pb/Cb	Pr/Cr	ANT IN	VIDEO OUT AUDIO OUT	SPEAKER
PC					R	R
L-AUDIO-R	VIDEO IN	L-AUDIO IN-R			S-VIDEO

or

DVD

DTV setup

-To watch digitally broadcast programs, purchase and connect a digital set-top box.

How to connect

Use the TV`s COMPONENT (Y, Pb/Cb, Pr/Cr) INPUT jacks, RGB or DVI port for video connections, depending on your set- top box connections available. Then, make the corresponding audio connections.

How to use

1. Turn on the digital set-top box. (Refer to the owner`s manual for the digital set-top box.)

2. Use YUV on the remote control to select YUV (Y, Pb/Cb, Pr/Cr) mode.

3. Press Play button on external equipment for program play.

10