6-4 SKIP Function: Use to SKIP Channels. After setting to ON the channel will not be selected by Channel Up/Down keys.
A. Push [MENU] key repeatedly to select TUNE
B. Using [P+] or [P-] key, select PROGRAM . Using [V+] or [V-] key, change POSITION.
C. Using [P+] or [P-] key, select SKIP . Using [V+] or [V-] key, select or OFF .
Exchange
6 Tuning Procedure
6-1 Auto Search Function: Automatic Search and Memory (ASM) is available for program installation from Antenna input.
Using [MENU] key on the front or [MENU] key on the
Remote for ASM. | | | Tuning | |
| | | |
A. Push [MENU] key repeatedly to select | TUNING | Program Number | 2 |
Skip | Off |
B. Push [P+] or [P-] key to select | AUTO SEARCH | Lock | On |
Auto Search | |
C. Push [V+] or [V-] key, to start ASM . | | Search | |
and memorize into program list (0~199). | | Fine Tune | On |
| AFT |
D. Wait until function has finished. | | Exchange | |
6-2 SEARCH Function: Manual Search for Antenna input. | |
A. Push [MENU] key repeatedly to select | TUNING . | | |
B. Using [P+] or [P-] key, select | PROGRAM NO . | | |
Using [V+] or [V-] or numeric keys to change Program Number. | |
C. Push [P+] or [P-] key to select | SEARCH . | | |
D.Push [V+] or [V-] key to start search. D. Wait until function has finished.
6-3 FINE TUNING Function: Fine Tuning for current setting.
A. Push [MENU] key repeatedly to select TUNING .
B. Using [P+] or [P-] key, select | PROGRAM NO . |
Using [V+] or [V-] change Program Number. |
C. Using [P+] or [P-] key, select | FINE TUNE . |
D. Using [V+] or [V-] key, adjust for best tuning.
,
ON
6-5 EXCHANGE Function: number and channel
| exchange.Push [MENU] key repeatedly to select | Program No. | 2 |
| Swap to | 2 |
| TUNING Using [P+] or [P-] key,select EXCHANGE |
| Exchange | |
C. Using [P+] or [P-] key, select | PROGRAM No . |
Using [V+] or [V-] key, change PROGRAM 1 number. |
D. Using [P+] or [P-] key, select | CHANGE TO | . Using [V+] or [V-] key, change |
number. | | |
E. Using [P+] or [P-] key, select | EXCHANGE | .Using [V+] or [V-] key, exchange |
is over. | | |
6-6 AFT Function: Auto frequency fine tune ON/OFF.
LOCK Function: When it is OFF, child lock is functionless; when it is ON, it could lock the present program.
