Television Setup, Connecting the RF Antenna

Television Setup

Connect the included RF antenna to the RF INPUT on the TV/DVD player.

DC9-12VIN OFF/ON SD/MMC CARD USBRF IN

Connect the cable TV source to the RF INPUT on the TV/DVD player.

USB

RF IN

SD/MMC CARD

DC IN OFF/ON 9-12V

Before the TV/DVD player can begin receiving television channels, a scan for available channels must be run.

1.Connect an RF antenna or cable TV source to the TV/DVD player.

2.Adjust the POWER SWITCH on the TV/DVD player to the ON position.

3.Press the SOURCE button repeatedly to select TV mode. Press the ENTER button.

4.Press the SCAN button on TV/DVD player.

A dialog box will appear on the display. Select YES if you want to run the auto scan. Select NO to cancel.

5.Press the VOLUME buttons to select between AIR and CATV.

Select AIR if you have an RF antenna connected to the TV/DVD player.

Select CATV if you have a cable TV source connected to the TV/DVD player.

6.Press the ENTER button.

7.The TV/DVD player will now automatically begin scanning for available channels. This process can take several minutes to complete.

To exit the Auto-Scan before it has completed, press the TV MENU button on the remote.