GETTING STARTED - SETTING UP YOUR TELEVISION
Connecting a Cable or Satellite Receiver or RF Antenna
You will need: Coaxial Cable, an
Connect the antenna’s output to the TV Antenna Input on the television.
Power the television on and press the Source Button to switch to TV Mode.
Auto Scanning for Channels
After you have connected the television to a power source and an antenna or cable source, press the Power Button to turn the tv on.
Press the Source Button to switch to TV Mode.
Press the Menu Button to access the televisions preferences and setup menu.
Press the TV Navigation Buttons (▲/►/▼/◄/
Enter) to select the Channel preferences.
Adjust the Air/Cable setting to air if you have hooked up an antenna, or cable if you have hooked up a cable or satellite receiver.
Press the TV Navigation Buttons (▲/►/▼/◄/ Enter) to select Auto Scan.
Basic Features
Channel +/- Buttons
Press to adjust the channel of the television.
Volume +/- Buttons
Press to adjust the volume of the television.
Number Keypad
Enter in a number to go to that specific channel.
The number entered must match the channel number exactly.
Standard Antenna
Mute Button
Press to mute the television.
TV Menu Button
Press to access the TV’s preferences and setup menu.
TV Navigation Buttons (▲/►/▼/◄/Enter)
Press to navigate the TV’s