Television Setup

Connecting a TV Antenna

Requires a TV antenna (not included).

1.Connect a VHF, UHF, or HDTV antenna to the RF INPUT on the television.

The Auto Channel Scan must be run before any channels can be viewed on the television.

2.Press the SOURCE button and switch to TV mode.

3.Press the MENU button.

4.Use the ARROW buttons to select Channel in the on-screen menu. Press the ENTER button.

5.Use the ARROW buttons to select Signal Type in the on-screen menu. Press the ARROW buttons to change the Signal Type to Air.

6.Use the ARROW buttons to select Auto Channel Search in the on-screen menu. Press the ENTER button to automatically scan for available channels.

Connecting Basic Cable

Requires a cable connection.

1.Connect a cable to the RF INPUT on the television.

The Auto Channel Scan must be run before any channels can be viewed on the television.

2.Press the SOURCE button and switch to TV mode.

3.Press the MENU button.

4.Use the ARROW buttons to select Channel in the on-screen menu. Press the ENTER button.

5.Use the ARROW buttons to select Signal Type in the on-screen menu. Press the ARROW buttons to change the Signal Type to Cable.

6.Use the ARROW buttons to select Auto Channel Search in the on-screen menu. Press the ENTER button to automatically scan for available channels.

Connecting a Set-Top Box

Requires a Set-Top Box (not included).

If your Set-Top Box has an HDMI Output:

•Connect the HDMI output on the Set-Top Box to the HDMI INPUT on the television using an HDMI cable (not included).

If your Set-Top Box has a Composite Video Output:

•Connect the video output on the Set-Top Box to the COMPOSITE VIDEO INPUT on the television using an A/V RCA cable (not included). Connect the audio output on the Set-Top Box to the RCA STEREO AUDIO INPUT on the television.

If your Set-Top Box has a Component Video Output:

•Connect the component video output on the Set-Top Box to the COMPONENT VIDEO INPUTS on the television using a component RCA cable (not included). Connect the audio output on the Set-Top Box to the RCA STEREO AUDIO INPUT on the television.

After connecting your Set-Top Box:

•Press the SOURCE button to switch between TV, AV 1 or 2, YPbPr 1 or 2, HDMI 1 or 2, and VGA to match the connection used.

Auto Scanning for Channels

The Auto Channel Scan must be run before any channels can be viewed on the television.

1.Press the SOURCE button and switch to TV mode.

2.Press the MENU button.

3.Use the ARROW buttons to select CHANNEL in the on-screen menu. Press the ENTER button.

4.Use the ARROW buttons to select Auto Channel Search in the on-screen menu. Press the ENTER button to automatically scan for available channels.

Customer Support: 1-888-999-4215

GPX