COBY electronic TF-DVD1570 specifications LCD Setup for DVD, Trouble Shooting, Specification

LCD Setup for DVD

LCD SETUP

Under the DVD mode, press the LCD SETUP button once on remote control to access picture parameters setup menu, the screen will display as below:

COLOR

CONTRAST

BRIGHTNESS

GAMMA CORRECT

EXIT COLOR ADJUST

EXIT

1.Press up/down direction button, it appears FUNCTION setup menu, and OSD MENU. Press OK button to confirm.

2.To exit the menu, press LCD SETUP button again, or press direction button to highlight the EXIT and then press OK to confirm.

COLOR Setup

COLOR

CONTRAST

BRIGHTNESS

GAMMA CORRECT

EXIT COLOR ADJUST

EXIT

1.Press up/down direction button to highlight the COLOR setup menu. And press OK to confirm.

2.Press up/down direction button to highlight the desired option and press OK to confirm. Refer to below table for detailed descriptions.

Item	Adjust Range	Instruction
Contrast	0-100	Adjust the contrast to your satisfaction
Brightness	0-100	Adjust the brightness to your satisfaction
Gamma Correct	4 grades (0,1,2,3)	Correct the brightness to your satisfaction	越
	9300K: R (54), G(69), B (62)	Adjust the color Temp to your
Color adjust	6500K: R (59), G(62), B (49)	satisfaction.
	User: R (0-100), G (0-100), B (0-100)

LCD Setup for DVD

FUNCTION Setup

FUNCTION

AUDIO

INPUT SOURCE

EXIT

EXIT

1.Press direction button to highlight the Function menu. And press OK button to confirm.

2.Press direction button to highlight the desired option from Noise Reduce/input Source, and press OK to confirm the selection.

Noise Reduction: press direction button to choose from ON/ OFF, and press OK to confirm. If ON is selected, the image will be shown clearly, but with unclear background.

If OFF is selected, both image and background are displayed normally.

Input Source: a certain input mode has been marked to indicate current situation Press direction button to change the desired mode from DVD/VGA/VIDEO/S- VIDEO/TV/ COMPONENT and press OK to confirm.

3.To exit function setup, highlight EXIT and press OK button.

OSD SETUP

OSD MENU

OSD TIMER

TRANSLUCENT

EXIT

EXIT

1.Press up/down direction button to highlight the OSD setup menu. And press OK to confirm.

2.Press up/down direction button to highlight the desired option and press OK to confirm. See Table 4 as below for detailed descriptions.

Item	Adjustment	Instruction
		When ON is selected, the OSD will automatically
		disappear after 8 seconds.
OSD Timer	Press up/down direction to select ON or OFF	When OFF is selected, the OSD can be closed just
		after selecting the Exit Submenu.
Translucent	Press up/down direction to select ON or OFF	When ON is selected, the OSD will be translucent.

Trouble Shooting

Symptom	Check and Action
No power	Make sure the unit has been powered on manually.
	Check if the power cord has been properly connected to the power outlet.
	Check if the main power has been switched on.
No picture	Try another TV channell
	Check if the system connection is proper and secure.
	Check if the connection cables are damaged.
	Increase the volume.
No sound	Check if the MUTE function of the unit has been activated.
	Check if the sound system has been properly set.
	Check if the AV audio signal input cable has been connected properly.
Color distorted	Reset the color system of the unit.
	Check if the system has been properly connected.
	Check if the AV video signal input cable is connected properly.
Picture and	Check if the system has been properly connected.
sound are interfered	If using antenna, adjust the antenna.
Remote control does	Make sure the POWER button on the unit has been turned on manually.
not work	Remove the obstacles between the remote control and the player.
	Point the remote control towards the remote sensor on the player.
	Check if the batteries of the remote control have been loaded with correct polarities.
	Replace the batteries of the remote control.
Screen is traverse	Correct the phase setting in PC mode.
interfered under
PC mode
Malfunction	Should the player develop a malfunction, unplug the player for 30 minutes. After that,
	power on the player and the restore function should reset the player.

			Specification
	Size	15"
TFT Panel characteristic	Resolution	1286x1024
	Pixel pitch	0.264mm
	TV system	NTSC 3.58/4.43 (VIDEO IN)
	Tuning system	FS with PLL
	AC/DC Adapter	AC input	100-240V 50/60Hz
Standard		DC output	+12V 5A
	Power consumption	On working	35W (Max)
		Standing	<2W
		Speaker	2x (4 , 3.5W)
	Operating temperature range	10 c-40 c
	Dimension	506x155x393 mm
	Weight	5302g

27 28