4
OSD FUNCTION
English
Function Name |
| Function | |
| Enable / Disable the Display Power Management Signaling | ||
DPMS Mode | which allows the display to go into Standby mode when there is | ||
| no signal coming in from the selected input. | ||
Power On Plug | Enable High Definition LCD TV to automatically turn on when | ||
power is restored. | |||
| |||
| Sets the High Definition LCD TV to turn off after a specified time | ||
| of no remote or panel button presses. Four options available: | ||
Inactivity Off | • | Off | |
• | 1 hour | ||
| |||
| • | 3 hours | |
| • | 6 hours | |
| Sets the High Definition LCD TV to turn off after a specified | ||
| amount of time: | ||
| • | Off | |
Sleep | • | 30 minutes | |
• | 60 minutes | ||
| • | 90 minutes | |
| • | 120 minutes | |
| NOTE: The High Definition LCD TV will take a few seconds to come back | ||
| from sleep mode. | ||
| Sets the power boot up mode: | ||
| • E. Saver – takes longer to come back from Standby but | ||
Power Mode |
| requires less power | |
| • Normal – takes faster to come back from Standby but | ||
|
| requires more power | |
LED | Turns the LED on the TV on and off | ||
| Autosource™ will detect a new incoming signal and | ||
Autosource™ | automatically switch the input source to the connection of the | ||
| new source’s device. | ||
26