SETTING and ACTIVATING the ALARM
NOTE: The VE720 must be turned “OFF” when performing the following procedure.
1)Press the SET button twice to enter the alarm mode, press the P3 button to toggle between the active and deactivated mode.
NOTE: If a series of dashes appear (--: --), the Alarm is DEACTIVATED.
2)Press the CH up/down buttons to set the desired hour/minute. When setting the alarm, check the AM/PM indicator to assure the proper setting.
3)Press the SEEK buttons to toggle between the hours and minutes.
4)Press the ON/OFF button. The alarm is now set and activated. Once the alarm is set it will sound each day at the same time as long as it is activated.
DEACTIVATING ALARM
1)Press the SET button twice to enter the alarm mode.
2)Press the P3 button once. The set time will disappear from the Display Window and a series of dashes
3)Press the ON/OFF button. The alarm is now deactivated.
NOTE: The set time will be stored in memory and can be reactivated whenever desired by performing step 1) – 3) of the ACTIVATING ALARM procedure.
SETTING THE ALARM TONES
1)Press the SET button twice (power off).
2)Press the P4 button once to hear the alarm tone.
NOTE: Alarm must be in the “Activated” mode to hear tones.
3)Each time CH UP/DOWN button(s) is pressed it will select a different alarm tone.
4)Press the ON/OFF button to confirm the selected tone.
5)When the alarm sounds, press the ON/OFF button to turn it off.
SETTING THE ALARM VOLUME
1)Power OFF
2)Press the SET button twice for the Alarm setting mode.
3)To select alarm tone, Press "P4" button and press volume UP/DOWN for your desired volume level. Then, press "SET" button for volume setting
17