Please make sure to connect the power plug to the wall outlet socket after connecting the TV to the power cord!
1.Install the base stand; place the TV on a solid surface.
3.Remote control:
Remove the cover of the battery compartment. Insert the 2 batteries supplied (Type AAA 1.5V).
Min 1 m
Ensure that the TV is placed in a position to allow free flow of air. Do not cover the ventilation openings on the back cover.
To prevent any unsafe situations, no naked flame sources, such as lighted candles, should be placed on or in the vicinity. Avoid heat, direct sunlight and exposure to rain or water.The equipment shall not be exposed to dripping or splashing.
2.Connect the antenna cable or CATV cable to the aerial socket ANT IN 75Ω at the back of the TV set.
4.Power:
Insert the power cord in the wall socket with AC power supply.You can see LED states at the front panel. If the LED color is Blue, means the TV set is power on. If the LED color is Red, which means this TV set is in standby state.
5.Turn the TV on:
Press the POWER key on the Remote control or the side panel control knobs. The TV will be turned on in a minute with display on the screen.
Power Key
Power
Video Comp PC/HDMI TV
7