MENU OPERATION
CHANNEL Menu
English
Select TV source.
1.Press the MENU button on the remote control to display the Main menu, and use the LEFT and RIGHT buttons to select the CHANNEL.
2.Use the UP and DOWN buttons to highlight an individual CHANNEL option, use the LEFT and RIGHT buttons to change the setting, and press the MENU button to exit.
Picture Audio
Air/Cable
Auto Scan
Favorite
Show/Hide
Channel No.
Channel Label TV Signal
Time | Setup | Lock | Channel |
Air
Go od
Select | Move | MEN U Exit |
The CHANNEL menu includes the following options :
Air/Cable
Allows you to select antenna between Air and Cable.
Use Down button to highlight the “Auto Scan” item, then press RIGHT button to enter into the following menu.
Picture | Audio | Time | Setup |
Cable System | Auto |
Start to Scan |
|
Move
Select
Lock Channel
MEN U Exit
If you select “Air”as input signal in Antenna item, you can press RIGHT button to search the channels automatically.
The receivable channels will be stored automatically. When searching channels, press MENU to stop.
Picture | Audio | Time | Setup |
RF CH: 7
Found : 4
Lock Channel
If you select “Cable”as input signal in Antenna item, allows
Move
Next
you to select Cable System among: Auto, STD, IRC and HRC. Use DOWN button to highlight the “Start to Scan”, then press
RIGHT button to search the channels automatically.The receivable channels will be stored automatically. When searching channels, press MENU to stop.
MENU Exit
24