OSD Menu
OSD Menu
If you select “QAM” as input signal in Signal Type item, you can press button to search the channels automatically. The receivable channels will be stored automatically.
When searching channels, press MENU to stop.
NOTE: It will take a while to auto scan in NTSC or ATSC mode, please wait patiently.
1. Select Next item by button and press OK/ENTER button to enter the next menu.
Model: XXXXXXX
Serial No: XXXXXXXXXXX
Channel Scan Type: QAM
2. Select Next item by button and press OK/ENTER button to enter the next menu.
3.Enter the code by the number buttons on the remote control to start the auto channel search.
17