CD/DVD OPERATION
This owner’s manual explains the basic instructions of this unit. Some DVDs are produced to limit operation during playback. For example, many DVDs do not allow users to skip government warnings, or in some cases previews or other features. This is not a defect in the unit. Refer to the instruction notes of discs.
“
” may appear on the screen during operation. A “ 
” means that the desired operation is not permitted by the unit or disc.
PLAYING A DISC
1.Press the STANDBY/ON button (on unit or remote control) to turn on the unit.
2.Press the FUNCTION button to select DVD mode.
See CUSTOMIZING THE DVD FUNCTION SETTINGS before proceeding to step 3.
3.Press the 
PUSH OPEN button to open the disc door.
4.Hold the disc by its sides and carefully press onto the central support of compartment with the printed side facing towards you until you hear a “click”.
5.Push the Dis Tray to close the disc door.
It takes a short while for your unit to load the disc. After loading, the unit will automatically either bring you to the main menu of the DVD, or start playing the DVD. If the unit does not
automatically start playing the DVD, press the 
PLAY button.
PAUSING PLAYBACK (STILL MODE)
Press the 
PAUSE button. To resume normal playback, press the 
PLAY button. Each time you press the 
PAUSE button, the picture advances one frame.
STOPPING PLAYBACK
Press the 
STOP button at the location where you want to interrupt playback. To resume
playback at the position where the disc was stopped, press the 
PLAY button.
If you press the 
STOP button twice, the unit’s memory will be cleared and pressing the 
PLAY button will reset the disc to the beginning.
SKIP (FORWARD / REVERSE)
•Press the 
PREV button to go back to previous chapters/tracks.
•Press the 
NEXT button to advance chapters/tracks.
•For an Audio CD, use the number buttons (remote control only) to jump directly to that track number.
FAST FORWARD/FAST REVERSE
1.Press the SEARCH 
or 
SEARCH button when a disc is playing.
•The disc begins fast scan at x2 speed.
•Four speeds are available. Each time the SEARCH 
or 
SEARCH button is pressed, the speed of fast scan changes in the following sequence:
X 2 
X 4 
X 8 
X 20 
2.Press the 
PLAY button when you reach the desired point to resume playback at normal speed.
SLOW-MOTION PLAY (DVD)
1.Press the 
SLOW button on remote control in the play mode. Two speeds are available. Each time the 
SLOW button is pressed, the speed of
SF 1/2 
SF 1/3 
SF 1/4 
SF 1/5 
SF 1/6 
SF 1/7 
2.Press the 
PLAY button to return to the normal playback speed.
20
20 | 20/04/2007, 15:20 |