O. Connecting to a TV or another monitor ( Refer to Figure 6)
You can also connect the DVD player to a TV to enjoy high quality stereo audio and video on another monitor. To connect the DVD player to a monitor requires the purchase of an audio/video cable. The cable is readily available at most electronic retailers. The cable consists of three RCA jacks with the colors red and white corresponding to right and left audio channels and the yellow RCA connector is the video signal. The purchased cable can then be connected to the supplied AV adapter cable which then interfaces to the DVD player.
1.Connect one end of the audio/video adapter cable’s black (1/8” stereo plug) plug into the unit’s DVD AUDIO OUT jack, and connect the other endto theAUDIO INPUT jacks onyourTVorMonitor (white = left channel, red = right channel).
2.Connect the audio/video adapter cable’s yellow plug into the DVD VIDEO OUT jack on the back of the unit, and the other yellow plug to the VIDEO INPUT jack on your TV or Monitor.
Cable Purchased
Separatly
Figure 6
*Optional wired headphones may be used with the unit. Simply plug in the headset to headphone jack.
33
PDF created with FinePrint pdfFactory Pro trial version http://www.fineprint.com