TROUBLESHOOTING GUIDE
SYMPTOM
No power.
The remote does not function.
DVD
No sound or only a very
No picture
The picture is not clear
Severe hum or noiseis heard.
The disc does not play.
CAUSE (AND REMEDY)
•Make sure the AC power cord is connected.
•Turn on the unit.
•Remove any obstacles between the remote and the unit.
•Use the remote near the unit.
•Point the remote at the remote sensor on the unit.
•Replace the batteries in the remote with new ones.
•Make sure that you’ve selected DVD mode.
•The system is in pause mode.Press the 
button to return to normal play mode.
•Fast forward or fast reverse is performed.Press the 
button to return to normal play mode.
•Make sure the AUDIO / VIDEO output and AV IN input connections are correct.
•This unit is too hot. Power off the unit for 30 minutes to cool down.
•The region number of the disc doesn’t match the region number of this unit.
•Clean the disc.
•The disc is scratched
•The plugs and jacks are dirty.Wipe them with a cloth slightly moistened with alcohol.
•Clean the disc
•There is no disc inside(“No Disc”appears on the screen).
•Insert the disc correctly with the label side facing yourself.
•Clean the disc.
•A
•Condensation may have formed inside the unit due to a sudden change in temperature.Wait about an hour for it to clean and try again.
43