Curtis LCD1105A manual IX Before Repair, Phenomenon Reason

Page 18

IX Before Repair

The following phenomenons do not mean that the TV set has fault.

Please check it according to the following methods before repair.

Phenomenon

Reason

 

 

 

AC adapter or automobile adapter

No image and sound

connecting improperly; using

unauthorized power; the power switch is

 

 

on the state of off.

No signal

Whether chosen the right channel; auto

setup receiving channel again; channels

 

need to be reset in a new place.

 

Whether the volume has been turned

No sound

down at the bottom; whether the

earphone is inserted; signals too weak;

 

 

the mute function is working.

 

 

Mosaic in the image

Whether the antenna has been adjusted

properly, and maybe the signals are too

 

weak.

Could not receive signals

Maybe the local signals are too weak;

open antenna or cable TV preferred.

 

 

Image too dark

Whether the brightness and contrast are

proper, and please adjust again.

 

 

 

When the car is moving,

It is possibly because that the local

if there are mosaics in

signals are too weak. Please move to

the image or the image

place with strong signals to receive.

and sound are not fluent.

 

-16-

Image 18
Contents LCD1105A Contents Precautions Special NoticeII Accessories III Appearance IV Description of Panel Buttons Remote Controller Operation Instruction AAAPage VI Basic Operation Connection Of External AntennaTV/AV Image Quality Adjustment VII TV Menu OperationSound Adjustment Time AdjustmentMenu State Settings SettingsOSD Language Settings Color Auto-adjustmentClosed Caption Settings Restore SettingsProgram Searching Show/Hide settings KQED-SD Select Menu Exit Viii To Receive Clear Image IX Before Repair Phenomenon ReasonLCD Screen Technical Parameter Technical ParameterInput Capability ParameterPict.-8