Curtis TVD2011 manual Tune Menu, Auto Search Function

TUNE MENU

4.Tuning procedure

4.1Auto Search Function:

Automatic Search and Memory (ASM)

A.Press [MENU]key on the front of the unit or the remote control repeatedly to select "TUNE".

B.Press[CH+]/[CH-]key to select "SIGNAL INPUT". By repeatedly pressing [VOL+] key,signal input mode will change as follows:

AIR CATV(STD) CATV(HRC) CATV(IRC)

For Canada user,recommend CATV(STD) input mode. C.Press [CH+]/[CH-] keys to select "AUTO SEARCH". D.Press[VOL+]/[VOL-] keys to start ASM and the tuner will scan for each

available channel in order to program it for direct selection.

4.2.FINE TUNING Function:Fine Tuning for current setting. A.Use[CH+]/[CH-]keys to select "PROGRAM".Using [VOL+]/[VOL-] keys,

to change program Number.

B.Use [CH+]/[CH-] keys to select "FINE TUNE". C.Use[VOL+]/[VOL-] keys to adjust for best tuning.

4.3.Program Function:Use to change program.

Use [CH+]/[CH-]keys to select"PROGRAM".Use[VOL+]/[VOL-] keys to change Program Number.

4.4.SKIP Function:Use to"SKIP"channels.After setting to"on",the program will not be selected when pressing channel Up/down keys. Use [CH+]/[CH-] keys to select"SKIP".Use[VOL+]/[VOL-] keys to select "ON" or "OFF".

-8-