2) Set the frequency of the recording
For once: Press K or L to point to "ONCE".
For daily (Monday~Friday): Press K or L to point to "DAILY".
For weekly: Press K or L to point to "WEEKLY".
Then, press B.
3) Set the date
First, press K or L for the month.
Then, press B. Next, press K or
Lfor the day. Then, press B.
4) Set the start time
First, press K or L for the hour. Then, press B. Next, press K or L
for the minute. Then, press B. And
then, press K or L for AM or PM. Then, press B.
¡If a tape ends during TIMER RECORDING, the VCR will stop, eject the tape, and switch to the DVD mode automatically as the TIMER light blinks. (If the DVD power is off, the VCR will become STANDBY status).
¡If a tape is not in the VCR or does not have a safe- ty tab, the TIMER light flashes and timer recording will not operate. Please insert a recordable tape.
¡When all timer recordings are finished, the TIMER light will flash.
To use the VCR again as usual, press
¡When timer recordings are set, the TIMER light will come on. To use the VCR as usual until the time for the recording, press
5) Set the end time
Follow the instructions of "Set the start time" to set the end time.
6) Set the channel number
Press K or L repeatedly for the desired channel number. Then,
ONE TIME PROGRAM
PROGRAM NUMBER 4
DATE 05 /12 MON START TIME 07: 30 PM
END TIME -
CHANNEL - -
REC SPEED - -
ONE TIME PROGRAM
PROGRAM NUMBER 4
DATE 05 /12 MON START TIME 07: 30 PM
END TIME 08: 30 PM
CHANNEL 
- 
REC SPEED - -
If you want to use the DVD player during a VCR timer recording or while the TIMER light is on or flashes.
¡You can use the DVD player while the TIMER light is on or flashes, or during a timer recording. Press POWER to turn on the DVD. Press DVD on the remote control to choose DVD mode, then continue with the other DVD features as described in this manual. You don’t have to set the TIMER off to use the DVD only.
press B.
If you connected the DVD/VCR COMBINATION UNIT to a cable box or satellite box as in "DVD/VCR TO TV CONNECTION" on page 13, select the DVD/VCR to channel 3 or 4 the same channel as RF output channel of the DVD/VCR. Then, select the channel you want to record with the cable box or satellite box.
Leave the cable box or satellite box on for timer recording.
7) Set the tape speed |
| ONE TIME PROGRAM | |
|
| PROGRAM NUMBER 4 | |
Press K or L repeatedly for the | DATE | 05 /12 MON | |
START TIME 07: 30 PM | |||
desired tape speed. Then, press B. | END TIME 08: 30 PM | ||
CHANNEL | 16 | ||
REC SPEED SP | |||
SP
SLP
5To set another program, repeat step [4]. To exit, press CLEAR/C.RESET.
6Press
¡The TIMER light on the DVD/VCR COMBINA- TION UNIT comes on. TIMER RECORDING
WILL NOT BE ACTIVATED UNLESS YOU PRESS
HINTS FOR TIMER
RECORDING
VCR
TO STOP AN AUTOMATIC TIMER PRO- GRAM ALREADY STARTED
Press STOP/EJECT on the DVD /VCR COMBINA-
TION UNIT.
TO CHECK, CORRECT, OR CANCEL AN AUTOMATIC TIMER PROGRAM
1Press
¡If the DVD output mode is selected, you have to switch it to the VCR mode by pressing the VCR on the remote control or the OUTPUT on the VCR.
2Select main menu by pressing MENU.
3Select "TIMER PROGRAMMING" by press- ing K or L. Then, press B.
4Select the program number you want to
check by pressing K or L.
¡The details of the selected program appears on the TV screen.
¡Go to the digit you want to change by pressing B or s. Then, enter correct numbers by pressing o or p.
¡You may cancel the entire program by pressing s while the program number flashes.
¡If there is a power failure or the VCR is unplugged | 5 | Press CLEAR/C.RESET to exit. | |
for more than 30 seconds, the clock setting and all |
|
|
|
timer settings will be lost. |
| 6 | Press |
|
| ||
– 20 – |
| EN | |
1L25