Technika 320Gb T835 user manual Main Interface, Menu System

Main Interface

When the box is switched on from stand-by mode for the first time or after first time installation, the following menu message will be displayed.

After hard disk initializing process, First Time Installation Menu window is displayed on the screen. In this window, set the TV type with “”/“” keys and press OK to continue.

Then “Do you want to start an automatic channel scan?” pop-up menu is displayed. Auto search can be started by selecting the “Yes” button. The box will automatically find the channels and store them for you.

To start installation process, select “Yes”, to cancel select “No”.

The set-top box will automatically tune to the channels. You can press the “MENU” button at any time during the process.

Menu System

Main menu is accessed by pressing the MENU key on the remote control. Navigate with “”/“” keys among the menus and press OK to activate menus. In some sub-menus, press the BACK button to return to the previous menu, otherwise, use it to exit from the menu. In all menus there is an Info banner at the bottom of the screen. These are functions that can be used in the current menu.

The Main Menu is accessed, pressing the MENU button. The items accessed through the Main Menu are:

1.)Channel List 2.)Programme guide 3.)Timers 4.)Recording Library 5.)Setup

Channel List

Channel list is the place where the channels are managed. The following operations can be performed in this menu:

1.Navigating the whole list of channels

2.Deleting unwanted channels

3.Renaming channels

4.Adding locks to channels

5.Setting the favourite list

Channel table is the place where the channels are managed.

English - 7 -