Connecting the LCD TV to a

For displaying your computer’s screen image on your LCD TV, you can connect your computer to the TV set.

•Power off both computer and display before making any connections.

•Use 15-pin D-sub display cable to connect a PC to the LCD TV.Use an audio cable between audio inputs of the TV (side) and audio output of your PC to enable sound connection.

•When the connection is made, switch to PC source.

See “Input selection” section.

•Set the resolution that suits your viewing requirements.

Resolution information can be found in the appendix parts.

	HDMI 2	HDMI 1
	VGA
	SPDIF
	Coax.OUT
		SCART
	Audio	PC Input
	Inputs	PC Input
	Inputs

PC audio cable

PC RGB cable

(not supplied)

to AUDIO INPUTS

to PC input

on the TV

Connecting to a DVD Player

If you want to connect a DVD player to your LCD TV, you can use connectors of the TV set. DVD players may have different connectors. Please refer to your DVD player’s instruction book for additional information. Power off both the TV and the device before making any connections.

Note: Cables shown in the illustration are not supplied.

•If your DVD player has an HDMI socket, you can connect via HDMI. When you connect to DVD player as illustrated below, switch to HDMI source. See, “Input Selection” section.

•Most DVD players are connected through

COMPONENT SOCKETS. Use a component video cable to connect video input. To enable sound connection, use AUDIO IN located side of the TV (YPbPr cable is not supplied).

•When the connection is made, switch to YPbPr source. See, “Input selection” section.

•You may also connect through the SCART socket.

Use a SCART cable as shown below.

	YPbPr to PC	Component
Scart socket	YPbPr to PC	audio	HDMI
Scart socket	cable (optional)	audio	HDMI
		inputs	input

DVD Player

Note: These methods of connection perform the same function but in different levels of quality. It is not necessary

to connect by all three methods.

English - 8 -