Appendix C: Supported DVI
Resolutions
When connecting devices to your TV’s connectors by using DVI to HDMI cables (not supplied), you can refer to the following resolution information.
Index | Resolution | Frequency | |
1 | 640x400 | 70Hz | |
2 | 640x480 | ||
|
| ||
3 | 800x600 | ||
72Hz | |||
|
| ||
4 | 832x624 | 75 Hz | |
5 | 1024x768 | ||
72Hz | |||
|
| ||
6 | 1152x864 | ||
7 | 1152x870 | 75Hz | |
8 | 1280x768 | 60 HzA | |
9 | 1280x768 | 60 HzB | |
10 | 1280x768 | 75Hz | |
11 | 1280x960 | ||
12 | 1280x1024 | ||
13 | 1360x768 | 60 Hz | |
14 | 1400x1050 | 60 HzA | |
15 | 1400x1050 | 60 HzB | |
16 | 1400x1050 | 75Hz | |
17 | 1400x900 | ||
18 | 1600x1200 | 60 Hz | |
19 | 1680x1050 | 60 Hz | |
20 | 1920x1080 | 60 HzA | |
21 | 1920x1080 | 60 HzB | |
22 | 1920x1200 | 60HzA | |
23 | 1920x1200 | 60Hz | |
24 | 60Hz | ||
25 | 50Hz |
Appendix D: Software Upgrade
•Your TV is capable of finding and updating new software upgrades over broadcast channels.
•For broadcast channels search, the TV looks at the available channels stored in your settings. So before the software upgrade search, it is advised to auto search and update all available channels.
1) Software upgrade search via user interface
•It is possible to manually to check if there is a new software upgrade for your TV set.
•Simply navigate on your main menu. Choose Settings and select Other Settings menu. In Other Settings menu navigate on to the Software Upgrade item and press OK button to open Upgrade Options menu.
•In Upgrade Options menu select Scan for upgrade and press OK button.
•If a new upgrade is found, it starts to download the upgrade. A progress bar indicates the remaining download progress. When the download completes successfully a message is displayed for reboot to activate new software. Press OK to continue with the reboot operation.
2) 3.AM search and upgrade mode
•If Automatic scanning in Upgrade Options menu is enabled, the TV wakes up at 03:00 and searches the broadcast channels for new software upgrade. If new software is found and downloaded successfully, with the next power up the TV opens with new software version.
Note on reboot operation: Reboot is the last step in software upgrade operation if download of new software is finished successfully. During reboot TV makes final initializations. In the reboot sequence panel power is closed and front led indicates the activity with blinking. Around 5 minutes later TV restarts with new software activated.
•If your TV fails to restart in 10 minutes, unplug power for 10 minutes and
Caution: While the LED is blinking during reboot do not unplug your TV’s power. Doing this may cause your TV not to
English - 28 -
For assistance, please call our Tesco Electrical Helpline on 0845 456 6767
01_MB62_[GB]_woypbpr_3902UK_IDTV_NICKEL17_22910LED_10075095_ | 50198877.indd 28 | 13.09.2011 14:17:02 |
|
|
|