Sharp 36F630 operation manual How to identify a cable converter Direct Entry Method

Page 45

Operation of Universal Remote Control (Continued)

•How to identify a cable converter

Direct Entry Method.

Refer to the following steps and list to quickly find the remote control code for your cable TV converter.

•First look up your converter’s remote code number before going through the Direct Entry Method below.

•If this procedure does not identify your conver ter, use the Search Method for identification.

(1)Press CATV/DVD button.

(2)Press and hold down DISPLAY and CH s on your remote control.

Then release both buttons.

(3)Within 10 seconds after releasing DISPLAY and CH s, enter your converter’s two-digit code number using REMOTE KEYPAD (refer to the list).

•The remote control is now ready to send commands to your converter.

•Some brands have more than one remote code listed due to changes in the remote codes from early to later model years. In such cases, you may have to try more than one code to find the code your converter accepts.

Note:

Depending on the model, year produced, brand, and type of CATV converter, some models may not be compatible with the remote control.

Search Method

(1)Press CATV/DVD button.

(2)Press the power button on the cable converter to ON.

(3)Stand at least 6 feet away from the converter. Point the Remote towards the converter. Hold down the DISPLAY and CH a at the same time. KEEP HOLDING THE BUTTONS DOWN.

(4)Watch the Channel Number indicator on the converter.

Channel numbers will scan up when the converter has been identified.

Release the DISPLAY and CH a as soon as the channel numbers start to scan up.

The converter’s remote control code number has been identified, and the Remote is ready to operate the converter.

CATV CONVERTER

REMOTE CONTROL

BRAND

CODE NUMBER

 

 

Anvision

07, 08

Cable Star

07, 08

Eagle

08

General Instrument

04, 05, 15, 23, 24, 25,

 

30, 36

Jerrold

04, 05, 15, 23, 24, 25

 

30, 36

Magnavox

07, 08, 19, 25, 28, 29,

 

32, 33, 40, 41

Oak Sigma

18

Panasonic

27, 39

Philips

07, 08, 19, 26, 28, 29,

 

32, 33, 40, 41

Pioneer

18, 20

Randtek

07, 08

RCA

27, 43

Scientific Atlanta

03, 22, 42

Sony

44

Viewstar

07, 08, 19, 26, 28, 29

 

32, 33, 40, 41

Zenith

14

 

 

Tips on identifying your cable converter Be Patient: A minute or two can seem a lot longer when you’re waiting for something to happen, but the code should be identified within 2 minutes. Remember, it is only a one- time set-up.

Be careful not to let the CATV converter scan more than 5 channels when the indicator starts to move up. If you continue holding down the DISPLAY and CH a after 5 channel scans, the proper remote code can be passed up, and the 2 minute identifying cycle will have to be repeated.

If a channel change does not occur on the cable converter within 2 minutes, read the identifying instructions again and repeat the steps. Should a channel change still not occur, the remote will not operate with the desired converter.

Note:

Some satellite receivers can be operated by the REMOTE CONTROL. If you have a Satellite Receiver, you can use the above method to search for available channels.

45

36F630(44-45)

45

03.3.5, 3:07 PM

Dimension: 140 X 215 mm

Page 44 Page 46
Image 45
Page 44 Page 46
Contents 36F630 Second Consumer Product Safety ACT First WarrantyWhat is Energy Star Model No Serial NoImportant Safeguards Important Safeguards Supplied Accessories Before Operating Your TelevisionAntenna Connections Combination VHF/UHF Antennas Separate VHF/UHF Antenna Type connector should be finger-tightened onlyPart Names Quick Reference Control OperationTo cancel EZ Setup EZ Setup during First UseAccessing the Main Menu screen without Remote Control Demo ModeExample Menu buttonLanguage Sleep TimerPress VOL k/l to access the Picture adjust screen Video AdjustPress VOL k/l to adjust the setting Description of Adjustment ItemsIf stereo sound is difficult to hear Audio SelectEquisound Sound Retrieval SystemSelected item VOL k button VOL l button Audio AdjustPress CH a/s to move the E mark to either Mode or Data Press VOL k/l to access the Closed Caption setting screenPress VOL k/ l to change the Closed Caption setting Mode DataChip Parent Control V-CHIP OperationMpaa Rating TV Parental GuidelinesExample 2.1 Content Based setting Example 1.2 Age Based settingExample 2.2 Content Based setting Example 3 Resetting an Age Based settingSee To change the V-CHIP Block after How to set V-CHIP 1 Mpaa RatingRegistering a secret No. on BlockedWhen done, press Menu to exit Enter a 4-digit Secret No. using the Remote KeypadWill set up automatically Downloading additional rating modeThere will be an additional new rating system. In that case Downloading V-CHIP dataAfter downloading the rating data Activating the V-CHIP Block To temporarily cancel the V-CHIP BlockTo activate the V-CHIP BLOCK. If Status is OFF, V-CHIP Block will not operateSimultaneously until the message Input Secret No To change the V-CHIP Block after registering a secret NoDisappears Press the Menu button twice to exitPress VOL k/l to access View Timer Parent Control View TimerView Timer Press MENU. Input Secret No. will be displayed36F63023-26 03.3.5, 300 PM VOL k and CH a VOL +Press VOL k/l to access the Energy Save select screen Energy SavePress VOL k/l to select on Press VOL k/l to access the CH Setting screen Set UpPress VOL k/l to access the EZ Setup screen Has started, press VOL l. Search will be canceledPress CH a/s to move the E mark to the desired mode Saving broadcast TV channels into memory CH Search screenTo start To stopPress VOL k/l to access the Blue Screen select screen Press VOL k/l to access the SET UP screenVOL k VOL lPress Menu to exit When the Blue Screen is set to on Memory Press CH a/s to move the E mark to Universal Plus Press VOL k/ l to access the SET UP screenAuto Input Press CH a/ s to move the E mark to SET UP Press VOL k/l to access the CH/INPUT ID screenCH/Input ID Space Alphabets A-Z Numbers Symbols . & / + Reset Resetting the ID toSelectable characters Press VOL k/l to access the Screen Format select screen Screen FormatPress CH a/s to select 43 or Connecting video equipment for playback of video material Using the Video and Audio Input TerminalsVCR To watch video material play backRear connection terminals of TV Using the Audio Output TerminalsUniversal Remote Control Operation of Universal Remote ControlUsing your Remote with your TV Press Remote KeypadHow to identify a VCR Direct Entry MethodSearch Method Tips on identifying your VCR VCR Brand Remote Control Code NumberDVD Brand Remote Control Code Number How To Identify a DVDCatv Converter Remote Control Brand Code Number How to identify a cable converter Direct Entry MethodCalling for Service Before Calling for ServiceCatv SpecificationsImportante De modelo De seriePrimera Garantía Segunda Acta DE Seguridad DE Productos DE ConsumidorMedidas DE Seguridad Importantes Medidas DE Seguridad Importantes Continuación Panel Delantero Referencia rápida de los controles de operaciónSolicitud de servicio técnico Antes de llamar al servicio de reparacionesDu modèle De série LA Premiere LA GarantieEnergy Star QU’EST-CE QUEC’EST Précautions Importantes Précautions Importantes suite Panneau Avant Référence rapide sur les commandesAvand d’appeler un réparateur Appel au service après-venteConsumer Limited Warranty Limited WarrantyDimension 140 X 215 mm Sharp Electronics Corporation
Top Page Image Contents