Sharp 27N S50 warranty Vol, Blue Screen

Set Up (Continued)

2.4 Press MENU to exit.

VOL (+)

To add channel 12 to the

TV memory

	VOL (–)
	To erase channel	12	from
(CH MEMORY	the TV memory		(CH MEMORY
unmemorized channel)			memorized channel)

NOTE:

REMOTE KEYPAD

VOLUME (+)/(–)

CHANNEL UP (8)/ DOWN (9)

MENU

•If you press VOL (+) again while in the CH SEARCH mode, auto-program will start again, and the previously memorized channels will be lost.

LBLUE SCREEN

Automatically turns the screen blue if a broadcast signal is not received.

1

2

Press MENU to access MAIN MENU screen.

Press CH UP (8) or DOWN (9) to move the “” mark to “SET UP”.

→

(MAIN MENU screen)

3 Press VOL (+) or (–)to access SET UP mode.

(SET UP mode)

4 Press VOL (+) or (–)to access BLUE SCREEN select mode.

(BLUE SCREEN select mode)

5 Press VOL (+) or (–)to select “ON”.

6 Press MENU to exit.

NOTE:

•Poor reception due to weak signals, or too much noise might activate the BLUE SCREEN function despite the presence of a broadcast signal. To continue watching TV under these conditions, switch the BLUE SCREEN “OFF”.

•While VCR input mode is selected, the BLUE SCREEN will not be shown on your TV even if the BLUE SCREEN is turned on.

29

26-29 27N-S50 29 6/1/00, 11:44 AM