Sharp LC 10A2U operation manual Selecting the Menu Items, Selecting a Menu Item

SELECTING THE MENU ITEMS

Selecting a Menu Item

•This LCD TV set allows you to adjust the picture and sound, and set the channels and other features using the On Screen Display. Select the desired menu item by following the steps below and then refer to the indicated page for details.

POWERMENU

CH

TV/VIDEO

CH

FLASHBACK

1 2 3

DISPLAY

4 5 6

7 8 9

MUTE

0

LCDTV

MENU

CH (])/ ([)

1 Press the MENU to display the MENU screen.

2 Press the CH (])/([) to select the desired menu item.

•The “>” mark moves up or down.

•The “>” mark indicates the selected menu item.

3 Press the VOL (+)/(–)to enter.

4 Press the MENU to exit.

Notes:

■The TINT display only appears when the color system sets N358 or N443 or AUTO in the NTSC mode.

■The displayed items differ depending on the setting conditions.

■The selected item changes to yellow.

■Items in purple cannot be selected.

■TV mode

This product is factory set to comply with the color system (NTSC-N358) in the United States. For Brazil (PAL- M), Argentina (PAL-N) and Uruguay (PAL-N), set the color system before using this product.

■COLOR SYSTEM

Set the system to AUTO for normal reception. The AUTO mode automati- cally detects the receiving signal system and changes the reception system of the set.

When the picture or sound is not stable, switching to an appropriate system may improve the picture or sound quality.

SLEEP TIMER
menu -----------------	Page 19

VIDEO ADJUST menu

(TV mode) ----- Page 20, 21

VIDEO ADJUST menu

(AV mode) ----- Page 20, 21

1

PRESET menu ---- Page 22

SETUP
menu ------	Page 23, 24, 25

* The screen indications shown above are larger than actual for easy reading.

17