Sharp LC 15A2U Adjusting the Blue Screen Settings, Press VOL +/-to display SET UP mode

Press the VOL (+)/(–)to display BLUE SCREEN select mode.

ADJUSTMENT (Continued)

Adjusting the BLUE SCREEN Settings

■BLUE SCREEN

Automatically turns the screen blue if a broadcast signal is not received.

1 Press the MENU to display the MENU screen.

2 Press CH (])/([) to move the “>” mark to “SET UP”.

(MAIN MENU screen)

3 Press VOL (+)/(–)to display SET UP mode.

(SET UP mode)

4

5 Press the VOL (+)/(–)to select “ON”.

(SET UP mode)

6 Press the MENU to exit.

Notes:

■Poor reception due to weak signals, or too much noise might activate the BLUE SCREEN function despite the presence of a broadcast signal. To continue watching TV under these conditions, switch the BLUE SCREEN “OFF”.

■While AV input mode is selected, the BLUE SCREEN will not be shown on your TV even if the BLUE SCREEN is turned on.

25