Sharp LC-60E88UN, TINS-E580WJZZ operation manual Troubleshooting Error Message, E202, E203

Page 47

Appendix

Problem

Possible Solution

 

 

• No picture

• Is connection to other components correct? Pages 11 to 15 and 36

•Is correct input signal source selected after connection? Page 30

•Is the correct input selected? Pages 11 and 17

•Is "On" selected in "Audio Only"? Page 30

•If the PC image is not displayed, check the following:

-When connecting a laptop PC to the TV, check that display output mode of the PC is set to external monitor.

-Check the resolution setting on the PC. Is a non-compatible signal being input?

Page 41

• Picture quality of HD programs is

• To enjoy HD images from external equipment, you are required to set up HDMI

poor.

connection or component connection.

 

• If the program content is not of HD quality, HD images cannot be displayed. Check

 

that the program you are viewing provides HD images.

 

• The HD cable/satellite set-top box may need to be confi gured to output HD images

 

via cable/satellite.

 

• The cable/satellite broadcast may not support a signal resolution of 1080p.

 

 

• The TV sometimes makes a

• This is not a malfunction. This happens when the cabinet slightly expands and

cracking sound.

contracts according to change in temperature. This does not affect the TV's

 

performance.

Troubleshooting - Error Message

The example of an error message

Error code

Possible Solution

displayed on a screen

 

 

 

 

 

• Failed to receive broadcast.

E202

• Check the antenna cable. Check that the antenna is correctly

 

 

setup.

 

 

 

• No broadcast now.

E203

• Check the broadcast time in the program guide.

 

 

 

• An incompatible audio signal has

—

• This message is displayed when an audio format other than

been received. Change the output

 

PCM is input. (Dolby Digital and DTS audio formats are not

device audio settings to PCM.

 

supported.)

 

 

- Set the audio output format of connected external HDMI

 

 

equipment to PCM.

 

 

- Refer to the operation manual of the external equipment for

 

 

setting details.

 

 

 

Cautions regarding use in high and low temperature environments

•When the unit is used in a low temperature space (e.g. room, offi ce), the picture may leave trails or appear slightly delayed. This is not a malfunction, and the unit will recover when the temperature returns to normal.

•Do not leave the unit in a hot or cold location. Also, do not leave the unit in a location exposed to direct sunlight or near a

heater, as this may cause the cabinet to deform and the Liquid Crystal panel to malfunction. Storage temperature: f4°F to e140°F (f20°C to e60°C)

45

Page 46 Page 48
Image 47
Page 46 Page 48
Contents LC-60E88UN Page LC-60E88UN Declaration of Conformity TrademarksDear Sharp Customer Additional Safety InformationCaring for the Cabinet Precautions when transporting the TVCaring for the Liquid Crystal panel Child SafetySupplied Accessories ContentsInsert the batteries into the rimote control unit. See Using the Remote Control UnitPower indicator on the front of the television lights Green Bundle the cords properly with the cable clampPreparation Installing Batteries in the Remote Control UnitConnecting Antenna Cable Close the battery coverTV Rear/Side Part NamesTV Front Part Names Remote Control UnitDisplaying an External Equipment Image Introduction to ConnectionsExperiencing HD Images Types of ConnectionRear of the TV Connecting to External EquipmentWhen using Hdmi cable Input 5, 6, 7 or When using DVI-HDMI conversion cable InputSide panel Rear of the TV Connecting to External EquipmentWhen using Component cable Input 1 or When using Composite cable Input 1 orWhen using audio cable Rear of the TV Connecting an Audio AmplifierWhen using optical fiber cable When using analog RGB cable Input Rear of the TV Connecting a PCWhen using DVI-HDMI conversion cable Input Rear of the TV Watching TV Turning On/Off the PowerInitial Installation Changing Channels Changing VolumeSleep Timer Direct Button OperationDirect Button Operation MTS/SAP stereo modeDigital broadcasting audio mode Examples Press Power SavingClosed Captions and Digital Closed Captions For HD programs Press View ModeYou can select the screen size For 43 programsLcfont embedded On-Screen Display MenuOn-Screen Display Menu Operation Menu Operation ButtonsOn-Screen Display Menu Menu ItemsPicture Menu OPC SettingAdvanced Picture Setting Color Temp Color TemperatureActive Contrast Gamma AdjustmentFilm Mode 32 pull-down Fine Motion AdvancedAudio Menu Power Control MenuSetup Menu Language Parental Ctrl Parental Control SettingReset PositionTV Parental Guidelines When setting an individual content-based rating itemChip Mpaa Voluntary movie rating systemReactivating the temporarily released V-CHIP Block How to temporarily release the V-CHIP BlockCanadian English Ratings Canadian French RatingsOption Menu Color System Operation Lock Out Caption SetupFavorite CH Favorite Channel Setting Demo ModeIdentification Digital Setup MenuSoftware Update Audio SetupRemove the USB memory device During the data checking, Checking blinksPress Enter to start updating After the screen shown below is displayed, pressOperating the Connected Equipment Presetting Remote Control FunctionPresetting manufacturer codes Other Viewing OptionsOther Viewing Options Manufacturer codes Controlling Hdmi Equipment Using Aquos Link Using Aquos LinkOne Touch Recording Using Aquos LinkAquos Link Setup Press d to start playing back a title Timer RecordingAquos Link Menu One Touch PlaybackHdmi Device Selection Playback of Titles Using Aquos LinkManually Changing Aquos Audio Speaker System’s Sound Mode Selecting Media Type for Aquos Link Compatible RecorderStretch Dot by Dot Using a PCDisplaying a PC Image on the Screen PC Audio Select Adjusting the PC Image Setting Audio InputPC Compatibility Chart Auto Sync For Analog PC Input Mode OnlyRS-232C Port Specifications Removing the Stand Setting the TV on the WallAppendix Pages 23 TroubleshootingAppendix E203 Troubleshooting Error MessageError code Possible Solution Displayed on a screen E202Part name Model number Optional AccessorySpecifications Model LC-60E88UNSecret number is Information on the Software License for This ProductLimited Warranty Calling for Service119 21/64 186 Dimensional Drawings15 3/4 24 21/32 56 5/8 52 17/32 29 5/8 135 20 41/64 17 9/16Sharp Electronics Corporation
Top Page Image Contents