Sharp PN-E421, PN-E471 manual 35 E, Recipient E-MAIL Addresses, Condition, Confirmation, Time

Page 35

■ MAIL (RECIPIENT)

This screen allows you to specify the recipients of the e-mail sent periodically or when the monitor has an error.

RECIPIENT E-MAIL ADDRESSES

Specify the e-mail addresses to send error notification e-mail to.

CONDITION

Specify the conditions to send mails.

When you check PERIODICAL, specify the date and time to send the mails in the PERIODICAL setting.

CONFIRMATION

Sends test e-mail.

This allows you to confirm that the e-mail settings are configured properly.

Attach the log file to a TEMPERATURE/HARDWARE error e-mail

When this option is checked, a log is added to the mail which notifies a temperature or status error.

TIPS

•The RECIPIENT E-MAIL ADDRESSES can be up to 64 alphanumeric characters or symbols.

Controlling the Monitor with a PC (LAN)

■ MAIL (PERIODICAL)

When PERIODICAL for CONDITION of MAIL (RECIPIENT) is checked, set the date and time to send the mail.

DAY OF THE WEEK

Specify the day of the week to send the periodical mails.

TIME

Specify the time of the day to send the periodical mails.

Caution

•Do not turn off the main power when you set to send the periodical mails.

•Specify the correct date and time. (See page 12.)

If the date and time settings are incorrect, the periodical mail is not sent properly.

•Regularly confirm that the specified date and time is correct.

•When LOW POWER is selected for STANDBY MODE, periodical mails will not be sent in standby mode.

35 E

Image 35

Contents PN-E471 PN-E421 Contents NRear view Part NamesNFront view Mute button See Part Names NRemote control unitSignal transmitter Power button Display button See Mode button See Size button See Menu button SeeMenu Basic OperationDisplay MuteCut off Basic Operation NSwitching the screen sizeWide Zoom Normal Dot by DotNMenu screen display Menu ItemsDisplaying the menu screen NExample of operationMenu PN-ZB01 optional Not attached Attached Baud Rate LAN Setup Speaker Select Option DC OUT SettingList of menu items Menu ItemsPbyP2 POS Some items may not be displayed depending on the input modeLines PIP/PbyPNPICTURE Menu item detailsNSCREEN NAUDIO NSETUP11 E NENLARGE PC input Menu Items NOPTIONMenu Items NDual screen display 13 ENPIP/PbyP Enlarge menu, set Enlarge H/V and ENLARGE-POS H/V. See NZOOM2 Special SettingSetting procedure Menu Items NEnlargeDAY of the Week Power15 E NSCHEDULENScreen display for adjustment Adjustments for PC screen displayNAutomatic adjustment 17 E Communication conditions Communication procedureControlling the Monitor with a PC RS-232C PC connectionNID numbers 19 ENCommunication interval OK 002 IDLK0000 ← Wait ← OK 002 ← VOLM0010 OK 001 ← 002VOLM0030 VOLM0020 ←21 E Setting of the Gamma user dataControlling the Monitor with a PC RS-232C RS-232C command tablePower control/Input mode selection How to read the command tableAudio menu 23 EControlling the Monitor with a PC RS-232C Picture menu Controlling the Monitor with a PC RS-232C Setup menu Controlling the Monitor with a PC RS-232C Option menu 25 EImage Position Epos setting Controlling the Monitor with a PC RS-232C PIP/PbyP menu Initialization/Functional Restriction Setting Function menu27 E Controlling the Monitor with a PC RS-232C Others Commands for setting of the Gamma user dataTo set on the monitor Settings to connect to a LANControlling the Monitor with a PC LAN 29 EControlling the Monitor with a PC LAN To set from a PC This monitor is factory preset as shown below IP AddressDefault Gateway 0.0 Basic operation 31 EControlling with a PC Controlling the Monitor with a PC LANScreen See Setup SeeInformation about this monitor appears Monitor’s menuAccept IP Address User Name / Password33 E DNS ServerMonitor Name Installation Information NAME/LOCATIONAuthentication Account Name / PasswordConfirmation 35 ERecipient E-MAIL Addresses ConditionVersion Snmp SettingTrap Setting Trap When Authentication Fails37 E TroubleshootingVesa DPMS, DVI Dmpm SpecificationsNProduct Specifications Vesa DDC2B39 E NDimensional DrawingsSpecifications NDDC plug and play Specifications NPower managementDmpm Digital Monitor Power Management 41 E Specifications NCompatible signal timing PCNCompatible signal timing AV NPC/AV Hdmi input terminal pins Specifications NPC/AV DVI-D input terminal pinsNPC D-sub input terminal pins NPC/AV DVI-D output terminal pinsPN-E471E421 G EN10B2

Related manuals

Manual 43 pages 5.2 Kb

Manual 16 pages 12.04 Kb