Sharp PN-L702B, PNL702BPKG2A operation manual 27 E, Menu Items NPIP/PbyP

Page 27

AUDIO OUTPUT (RCA)

Sets the volume of sound output from the audio output terminals.

When set to VARIABLE 2, sound will not be output from the built-in speaker or the external speaker terminal.

VARIABLE1

You can adjust the volume using VOLUME.

VARIABLE2

You can adjust the volume using VOLUME.

FIXED

Fixes the sounds.

AUDIO LEVEL (STEREO MINI)

Selects the maximum audio input level of the audio input terminal.

SELF ADJUST

On a PC D-SUB/PC RGB screen, specify whether to

perform screen adjustment automatically or not. When ON is selected, the screen is automatically adjusted when its resolution is 800 x 600 or higher and the timing of input signals changes. “ADJUSTING” appears on the screen during the adjustment. For images with black edges, etc., depending on the signal, adjustment may not be possible. In this case select OFF. (Perform manual adjustment of the screen.)

AUTO INPUT CHANGE

Specify whether to change inputs automatically. When ON is

selected and no signal is present in the selected input mode,

AUTO INPUT CHANGE automatically changes the selected

mode to another mode where a video signal is present.

When video signals exist in multiple input modes, the

switching priority is as follows:

PC D-SUB, PC HDMI, AV HDMI, AV COMPONENT and AV VIDEO

When the PN-ZB01 (optional) is attached:

PC DVI-D, PC HDMI, PC D-SUB, PC RGB, AV DVI-D, AV HDMI, AV COMPONENT, AV S-VIDEO and AV VIDEO (Input mode switching may take 15 seconds or more, depending on the connected equipment. Input signals

may not be detected properly and a priority may change,

depending on the connected equipment or video signals.)

TOUCH PANEL MODE (PC input)

When the resolution is 1920 x 1080, setting this to ON

improves touch panel tracking.

When two screens are displayed, or when V-POS or V-SIZE is adjusted on the SCREEN menu, the screen may become distorted. In this vent, set to OFF.

Menu Items

nPIP/PbyP

PIP MODES

Sets the display method.

OFF

Displays one screen.

PIP

Displays a sub screen inside a main screen.

PbyP

Displays a main screen and a sub screen in a line.

PbyP2

Displays a main screen which measures 1280 pixels

 

in the longest direction and a sub screen in a line.

PIP SIZE

Sets the size of the sub screen in PIP mode.

PIP H-POS

Adjusts the horizontal position of the sub screen in PIP mode.

PIP V-POS

Adjusts the vertical position of the sub screen in PIP mode.

PIP BLEND

In PIP mode, use this menu item to display the sub screen transparently.

PIP SOURCE

Selects the input signal of the sub screen in PIP, PbyP, or PbyP2 mode.

SOUND CHANGE

Sets the sound which is output in PIP, PbyP, or PbyP2 mode. If the main screen is displayed as a full screen by the AUTO

OFF function, the sound for the main screen is output even when the sound for the sub screen is specified.

MAIN POS

Sets the position of the main screen in PbyP or PbyP2 mode.

PbyP2 POS

Sets the position of the sub screen in PbyP2 mode.

AUTO OFF

Sets the display method when no signals for the sub screen are input in PIP, PbyP, or PbyP2 mode.

MANUAL....... Displays a main screen and a black sub screen.

AUTO............ Displays the main screen as a full screen.

TIPS

•When WHITE BALANCE is set to THRU, BLACK LEVEL, CONTRAST, TINT, COLORS, RGB INPUT RANGE, GAMMA and COPY TO USER cannot be set.

•If COLOR MODE is set to sRGB, the following items cannot be set.

WHITE BALANCE, PRESET, USER, COPY TO USER, and

GAMMA

•When the COLOR MODE is set to VIVID, GAMMA can not be adjusted.

•STANDBY MODE cannot be set to LOW POWER when SCHEDULE is effective or when OFF is selected for LED in

FUNCTION.

•When displaying the color pattern, it is possible to adjust certain items of the PICTURE menu.

Non-adjustable items cannot be selected.

Audio input from the HDMI input terminal is also not output.

27 E

Page 26 Page 28
Image 27
Page 26 Page 28
Contents PN-L702B Brown For Customers in U.KGREEN-AND-YELLOW BlueImportant Information Refer Servicing to Qualified Service PersonnelOther Countries outside the EU Information on Disposal for Users private householdsInformation on Disposal for Business Users European UnionDear Sharp Customer Safety Precautions Tips and Safety Instructions Mounting Precautions Contents Supplied ComponentsSystem Requirements Part Names NFront viewNRear view 11 E NRemote control unit Part NamesSignal transmitter Power button See Mute button SeeConnection with a PC or AV equipment Connecting Peripheral Equipment13 E Connecting Peripheral EquipmentHandles can be removed Connecting the Power CordBinding Cables Removing the Handles15 E Preparing the Remote Control UnitInstalling the batteries Remote control operation rangeStatus Status of the monitor Turning Power On/OffTurning power on/off Turning on the main power17 E Disabling power on/off operationsNDate/time setting Turning Power On/OffTouch action Inserting the batteryTouch action and touch mode Touch Pen Preparations/Touch Action19 E Touch Pen Preparations/Touch ActionNFinger actions Other functions EraserNPen actions Menu Basic Operation21 E MuteCut off Basic Operation NSwitching the screen sizeWide Zoom Normal Dot by DotMenu Items 23 EDisplaying the menu screen NPICTURE Menu item detailsMenu Items NSCREENMenu Items NSETUP 25 ENAUDIO NOPTION Menu Items NPIP/PbyP 27 EPbyP NZOOM2 Special SettingMenu Items NDual screen display PIPDAY of the Week Power29 E NSCHEDULEAdjustments for PC screen display NAutomatic adjustmentNScreen display for adjustment 31 E Communication conditions Communication procedureControlling the Monitor with a PC RS-232C PC connection33 E NResponse code formatNID numbers OK 002 IDLK0000 ← Wait ← OK 002 ← VOLM0010 OK 001 ← 002VOLM0030 VOLM0020 ←35 E Setting of the Gamma user dataCommand Command field See Direction RS-232C command tablePower control/Input mode selection How to read the command tableControlling the Monitor with a PC RS-232C Screen menu 37 EControlling the Monitor with a PC RS-232C Picture menu Setup menu 39 EControlling the Monitor with a PC RS-232C Audio menu Controlling the Monitor with a PC RS-232C Option menu Initialization/Functional Restriction Setting Function menu 41 EControlling the Monitor with a PC RS-232C PIP/PbyP menu Controlling the Monitor with a PC RS-232C Others Commands for setting of the Gamma user dataTo set on the monitor Settings to connect to a LANControlling the Monitor with a PC LAN 43 EControlling the Monitor with a PC LAN To set from a PC Default Gateway 0.0Basic operation 45 EControlling with a PC Controlling the Monitor with a PC LANInformation Standby mode, Power on is the operation availableAccept IP Address User Name / Password47 E DNS ServerMonitor Name Installation Information NAME/LOCATIONAuthentication Account Name / PasswordConfirmation 49 ERecipient E-MAIL Addresses ConditionVersion Snmp SettingTrap Setting Trap Setting of Authentication Error51 E TroubleshootingTroubleshooting When Auto Dimming is displayedMonitor makes a cracking sound Specifications NProduct Specifications53 E NDDC plug and play Specifications NDimensional DrawingsNPower management Dmpm Digital Monitor Power ManagementSpecifications NCompatible signal timing PC NCompatible signal timing AV55 E NPC/AV Hdmi input terminal pins Specifications NPC/AV DVI-D input terminal pinsNPC D-sub input terminal pins NPC/AV DVI-D output terminal pins57 E NAttaching the TraySecure the tray PN-L702B Mu EN11H1
Related manuals
Manual 9 pages 43.56 Kb Manual 9 pages 52.67 Kb Manual 9 pages 56.18 Kb

PNL702BPKG2A, PNL702B, PN-L702B specifications

The Sharp PN-L802B, PN-L602B, PN-L702B, and PNL802B and PNL602B are a series of cutting-edge interactive displays that focus on enhancing collaboration and communication in various settings, including educational institutions, corporate environments, and creative studios. These models are designed to transform the way users engage with content, enabling seamless collaboration and improving overall productivity.

One of the standout features of the Sharp PN-L series is its large-sized display technology, with models such as the PN-L802B boasting an impressive 80-inch diagonal screen and the PN-L602B offering a 60-inch option. These expansive screens provide vivid visuals with 4K Ultra HD resolution, delivering stunning clarity and detail that captivates viewers. The enhanced brightness and wide viewing angles ensure that content is easily viewable from various positions in the room.

Touch technology is another defining characteristic of the Sharp PN-L series. The displays utilize advanced infrared touch technology, allowing for up to 10 points of simultaneous touch. This multi-touch capability enables multiple users to interact with the display at the same time, fostering a dynamic and interactive experience for collaboration and brainstorming sessions. The seamless touch responsiveness enhances user engagement, making it easier to navigate content and annotate directly on the screen.

The models also come equipped with Sharp's powerful software solutions, such as the easy-to-use Sharp Pen Software, which allows users to write and draw directly on the screen, making annotations and modifications in real-time. Additionally, the displays support various connectivity options, including HDMI, USB-C, and wireless sharing, facilitating easy integration with other devices and systems.

Moreover, the PN-L series is designed with a focus on durability and ease of use. The anti-glare surface reduces reflections and distractions, while the ergonomic design ensures that the displays can be easily installed at convenient heights for user interaction. Enhanced security features are also built in, safeguarding content and user data.

In summary, the Sharp PN-L802B, PN-L602B, PN-L702B, PNL802B, and PNL602B bring together large-scale interactive technology, rich visuals, and collaborative features that set a new standard for interactive displays. Their versatility and advanced capabilities make them an ideal choice for any environment where teamwork and communication are pivotal.
Top Page Image Contents