PC/AV DVI-D input terminal, PC RGB input terminals

Connection when the PN-ZB01 (optional) is attached

The PN-ZB01 expansion board (optional) allows the use of additional connection terminals.

6. PC/AV DVI-D input terminal

•Set DVI of INPUT SELECT on the OPTION menu according to the device to be connected.

•Select the audio input terminal to be used in PC DVI-D or

AV DVI-D of AUDIO SELECT on the OPTION menu.

7. PC RGB input terminals

•Set BNC of INPUT SELECT on the OPTION menu to PC RGB when using the PC RGB input terminals.

•Select the audio input terminal to be used in PC RGB of

AUDIO SELECT on the OPTION menu.

8. AV component input terminals

•Set BNC of INPUT SELECT on the OPTION menu to

AV COMPONENT when using the AV component input terminals.

•Select the audio input terminal to be used in AV

COMPONENT of AUDIO SELECT on the OPTION menu.

9. AV video input terminal

•Select the audio input terminal to be used in AV VIDEO of

AUDIO SELECT on the OPTION menu.

10. AV S-video input terminal

•Select the audio input terminal to be used in AV S-VIDEO of AUDIO SELECT on the OPTION menu.

11.Audio1 input terminals / Audio2 input terminals

• Set the audio input terminal to be used in each input mode in AUDIO SELECT on the OPTION menu.

12.LAN terminal

•You can control the monitor from a PC on a network by connecting a commercially available LAN cable between this terminal and a network.

13. External speaker terminals

•To use external speakers, set SPEAKER SELECT on the

SETUP menu to EXTERNAL.

•Be sure to use external speakers with an impedance of 6 Ω or greater and a rated input of at least 10 W.

1	2	3
	Approx.
	3-15/16 inch
	(10 cm)

1.Attach a speaker cable core (included with the PN-ZB01) to the end of the speaker cable connected to the monitor.

2.While pushing the tab, insert the tip of the cable.

3.Release the tab.

TIPS

•Be sure to connect the + and - terminals and the left and right speakers properly.

•Avoid short circuiting the + and - terminals.

•When SPEAKER SELECT is set to EXTERNAL, the internal speakers are disabled.

Connecting Peripheral Equipment

14. PC/AV DVI-D output terminal

•The video of the PC/AV DVI-D input can be output to an external device.

•Outputting HDCP-encrypted video requires an external device which supports HDCP.

•This terminal allows the daisy chain connection of up to 5 monitors.

TIPS

•The length of the signal cables or surrounding environment may affect the image quality.

•The screen may not display properly when using terminals other than PC DVI-D/AV DVI-D for the input mode. In this case, turn off the power to all the monitors connected in a daisy chain and then turn the power on again.

•When connecting monitors in a daisy chain set AUTO

INPUT CHANGE to OFF.

•Video output is disabled in the following cases: When the input mode is PC HDMI/AV HDMI

When PIP SOURCE of the PIP/PbyP menu is set to PC

HDMI or AV HDMI

When the power is turned off

When the monitor is in input signal waiting mode

ENGLISH

9 E