Sharp LC 37HV6U operation manual Input signal source, DVI input signal setting, Input selection

Useful adjustment settings

Input signal source DVI input signal setting

			MENU	TV/SAT/DVD	DTV/DVD TOP
	TV CBL	VCR DVD	RETURN	MENU	MENU
TV	/SAT	/LD
	/DTV		SOURCE		DTV/SAT
POWER	ANT-A/B	INPUT
			POWER		GUIDE
AV	Virtual
MODE		MTS	CC	SET/
				ENTER	DTV/SAT
	TWIN
	PICTURE	SELECT			INFO

VCR REC

Display

INPUT button

Input selection

Can use for selecting the input source.

1 Press INPUT on the remote control unit or on the Display.

2 Press INPUT on the remote control unit or on the Display to select the input source.

•An image from the selected source automatically displays.

•You can also select the input source by pressing a/b.

The digital input signal switches automatically between 1080i, 720p and VGA or 480p. For VGA or 480p, set manually following the steps as shown below.

The analog input signal also switches automatically between 1080i, 540p and VGA, and it does not need to be set manually (“Input Signal” does not appear in the menu).

The DVI-HDTV terminal of this System supports the HDCP* standard.

1 Press INPUT on the remote control unit or on the Display and select “INPUT3”, as explained in Input selection.

2 Select “Auto” or “DVI” from the “Input Select” menu for INPUT 3 signals, as explained in Input signal setting.

3 Press MENU and TV MENU screen displays.

4 Press c/dto select “Setup”.

NOTE	5	Press a/bto select “Input Signal”, and then
• Some items may be grayed out. They are not selectable.
		press SET/ENTER.
Input signal setting
			TV MENU [Setup ... Input Signal]

For setting the signal type of external equipment	Setup	Option
connected to INPUT 1 or 3 terminals.
	Speaker	[Internal]

1	Press MENU and the TV MENU screen
		Input Signal	[VGA]
	displays.
		Parental CTRL
2	Press c/dto select “Option”.	Position
		Picture Flip	[Standard]
		Language	[English]

52

3	Press a/bto select “Input Select”, and then
	press SET/ENTER.
4	Press a/bto select a signal type you want
	to set, and then press SET/ENTER.

• If the selected signal type is incorrect, an image does not display or no color image displays.

NOTE

•The System automatically sets input signals from “INPUT2”, “INPUT4” and “PC”.

•If no (color) image displays, try to change the signal type.

•Check the operation manual of the external equipment for the signal type.

•Setting INPUT 1 and INPUT 3 signal selection to “Auto” when other equipment is connected will result in the following connectivity priority.

INPUT 1	INPUT 3
1. COMPONENT VIDEO	1. COMPONENT VIDEO
2. S-VIDEO	2. S-VIDEO
3. VIDEO	3. VIDEO
	4. DVI

6 Press c/dto select a signal type you want to set, and then press SET/ENTER.

VGA 480p

NOTE

•* What is HDCP (High-Bandwidth Digital Content Protection)?

•HDCP is a copyright protection technology that uses TMDS (Transmission Minimized Differential Signal).

•HDCP was developed to prevent the illegal copying of DVI signals.