Sharp LC-15SH1E, LC-13SH1E Part Names of the Main Unit, Main Power Input, Channel i -/+ Volume

Part Names of the Main Unit

The examples used throughout this manual are based on the LC-20SH1E model.

Controls	How to adjust the angle
Upper control panel

12°

30°

Adjustable range

(MAIN POWER) (Input)

MENU

P ( )/() (Channel) i (–)/(+) (Volume)

The screen angle can be tilted backwards between 12 and 30 degrees. (It cannot be set to vertical.) When changing the angle, make sure to hold the stand and adjust the screen to the best viewable angle.

STANDBY/ON indicator

Speaker

OPC (Optical Picture Control) indicator

The OPC indicator lights up green when the “Backlight” is set to “Auto (OPC)”. (See page 21.)

OPC sensor

Remote sensor

STANDBY/ON indicator lights up green when the power is on, and red when in the standby mode (the indicator will not light when the main power is off).

NOTE

•	(Input), P ( )/( )(Channel), i (–)/(+) (Volume) and MENU on the control panel of the main unit have the same functions as
	the same buttons on the remote control (see page 12). Fundamentally, this operation manual provides a description based on operation
	using the remote control.

7

LC-13_15_20SH1E_E_P01-09.p65 7 04.10.8, 4:32 PM