Sharp LC-15B5M, LC-20B5M operation manual Presetting the Channels Manual

Preset (Continued)

Presetting the Channels (MANUAL)

■Setting a channel to a desired TV station:

Upper control panel

4 3 1, 2, 6

■In a weak reception area, or under bad reception conditions.

Upper control panel

4 1, 2, 3, 5

1	Press MENU (PRESET-1) on the upper part of the
	LCD TV set for more than 2 seconds. The AUTO
	mode screen appears.
				Sound system
	Auto(B/G)
	VHF		1
		48.25MHz
2	Press MENU (PRESET-1) to display the MANUAL
	mode screen. Press MENU (PRESET-1) again to
	change the MANUAL mode as shown below.
	AUTO		MANUAL		LANGUAGE	NORMAL SCREEN
3	Select the channel position using Channel Select or
	CH ( )/( ).
	Manual(B/G)
	VHF		1
		48.25MHz

1	Press MENU (PRESET-1) on the upper part of the
	LCD TV set for more than 2 seconds. The AUTO
	mode screen appears.
2	Press MENU (PRESET-1) to display the MANUAL
3	mode screen.
	While the MANUAL mode screen is displayed, press
	MENU (PRESET-1) for more than 2 seconds.

The channel position number remains in green.

4 Adjust for good reception using VOL (+)/(–).

5 After finishing the adjustment, press MENU (PRESET-1) to continue channel presetting.

NOTE

•While the MANUAL mode screen is displayed, press MENU (PRESET-1).

(The LANGUAGE mode screen will appear.)

Manual(B/G)

VHF 1 48.25MHz

Fine

UHF 5 623.25MHz

		E n g l i s h
: SELECT	O K : ENTER	M : BACK	E : EXIT

4	Press VOL (+)/(–)to locate the channel you want to
	preset to the position. Search is initiated and when a
	TV signal is received during the search, the search
	stops.
5	Repeat steps 3 and 4 above, to preset the channel
	positions for other broadcasts, etc.
	Manual(B/G)
	UHF	5
	623.25MHz

6 Press MENU (PRESET-1) to return to the normal screen.

NOTE

•SYSTEM may not have been set correctly, if noise can be heard or if there is no sound. In such case, reset to “Sound system” using MENU (See page 14).

13