Troubleshooting, Power outlet | Sharp LC-13S2U, LC-15S2U, LC-20S2U

TROUBLESHOOTING

■Before calling for repair services, make the following checks for possible remedies to the encountered symptoms.

TV set

	Problem			Check item	Reference
	Problem			Check item	Pages
					Pages
			•	Make sure the AC adapter is properly inserted in the	11
	Picture			power outlet.	–
Sound	Picture	There is no	•	Reception other than those of broadcasting stations
		There is no	•	Reception other than those of broadcasting stations
		picture or		can be considered.	22
		sound.	•	Make sure the input mode is set to TV.	22
			•	Make sure the MAIN POWER switch of the main unit	21
				is on.
		There is no	•	Make sure the BLACK LEVEL is properly adjusted.	32, 33
	Picture	There is no	•	Fluorescent lamp may have reached the end of	52
	Picture	picture.	•	Fluorescent lamp may have reached the end of	52
		picture.		service life.
		There is no		service life.	48
		There is no	•	Make sure the S-VIDEO terminal has nothing con-
		picture from	•	Make sure the S-VIDEO terminal has nothing con-
		picture from		nected.
		AV-IN1/2.		nected.
		AV-IN1/2.	•	Make sure the AUDIO ONLY is not set to ON.	29
			•	Make sure the AUDIO ONLY is not set to ON.	29
			•	Make sure the volume is not set to minimum.	23
		There is no	•	Make sure the sound is not set to mute.	23
		There is no	•	Make sure that headphones are not connected.	23
		sound.
		There is no	•	Make sure the antenna cable is properly connected.	10
		There is no	•	Bad reception could be the problem.	–
		picture or	•	Bad reception could be the problem.	–
		picture or
		sound, just
		noise.
			•	Make sure the antenna cable is properly connected.	10
		Picture is not	•	Bad reception could be the problem.	–
		Picture is not
		clear.
			•	Check color adjustment.	32, 33
		Picture is light	•	Check COLOR SYSTEM setting.	32, 33
		or improperly
		tinted.
			•	Press the BRIGHT button or set the BRIGHTNESS	27
		The picture is		settings.	32, 33
		The picture is	•	Check PICTURE and BLACK LEVEL adjustment.
		too dark.	•	Check PICTURE and BLACK LEVEL adjustment.
		too dark.	•	Fluorescent lamp may have reached the end of	52
			•	Fluorescent lamp may have reached the end of	52
				service life.
Remote control does not work.			•	Check the batteries of the remote control.	8
Remote control does not work.			•	Make sure the remote sensor window is not under	8
				strong lighting.
			•	The broadcasted EDS signal may be weak. Check the	–
The clock (AUTO CLOCK)				antenna.	17–19, 35
The clock (AUTO CLOCK)			•	Carry out EZ SETUP, SETTING THE CLOCK again.
cannot be set.			•	Carry out EZ SETUP, SETTING THE CLOCK again.
cannot be set.			•	If EDS signal is not sent, set the clock using MANUAL	19
			•	If EDS signal is not sent, set the clock using MANUAL	19
				CLOCK Setting.

TROUBLESHOOTING

Problem

Check item

Make sure the AC adapter is properly inserted in the

power outlet.

Carry out EZ SETUP, SETTING THE CLOCK again.