Sharp LC-C3237U Preparation, Antennas, Installing Batteries in the Remote Control Unit

Page 9

Preparation

Antennas

To enjoy a clearer picture, use an outdoor antenna. The following is a brief explanation of the types of connections that are used for a coaxial cable. If your outdoor antenna uses a 75-ohm coaxial cable with an F-type connector, plug it into the antenna terminal at the rear of the TV set.

1.A 75-ohm system is generally a round cable with F-type connector that can easily be attached to a terminal without tools (Commercially available).

2.A 300-ohm system is a fl at “twin-lead” cable that can be attached to a 75-ohm terminal through a 300/75-ohm adapter (Commercially available).

F-type connector

75-ohm coaxial cable (round)

300-ohm twin-lead cable (fl at)

NOTICE F-type connector should be finger-tightened only.

When connecting the RF cable to the TV set, do not tighten F-type connector with tools.

If tools are used, it may cause damage to your TV set. (The breaking of internal circuit, etc.)

Connecting Antenna Cable

F-type connector

75-ohm coaxial cable

• Connect the antenna cable to the TV using one of the methods in the illustration as shown (1, 2, 3 or 4).

1Cable without a CATV converter

2VHF/UHF antenna

3Combination VHF/ UHF antenna

4Separate VHF/UHF antenna

 

 

 

 

Home Antenna

 

Cable TV lead-In

 

terminal (75-ohm)

 

 

 

 

 

 

 

 

Coaxial cable

 

 

 

 

(commercially available)

 

 

 

 

Home Antenna

 

75-ohm coaxial cable (round)

terminal (75-ohm)

 

 

 

 

 

 

 

Coaxial cable

 

 

 

 

(commercially available)

 

75-ohm coaxial cable (round)

 

 

 

 

 

 

or

 

 

 

 

 

300/75-ohm adapter

 

300-ohm twin-lead cable (flat)

(commercially available)

 

 

 

 

UHF

300-ohm

 

 

VHF

ANTENNA

 

 

twin-lead cable

 

 

 

 

 

 

ANTENNA

 

 

IN

OUT

 

 

 

 

 

 

 

 

Combiner

 

 

300-ohm twin-lead cable

(commercially available)

 

or

75-ohm coaxial cable

 

To TV antenna

 

 

terminal

 

 

 

 

 

Installing Batteries in the Remote Control Unit

If the remote control fails to operate TV functions, replace the batteries in the remote control unit.

1 Open the battery cover.

2 Insert two “AA” size batteries

3 Close the battery cover.

 

(supplied with the product).

 

•Place the batteries with their terminals corresponding to the (e) and (f) indications in the battery compartment.

CAUTION

Improper use of batteries can result in chemical leakage or explosion. Be sure to follow the instructions below.

•Do not mix batteries of different types. Different types of batteries have different characteristics.

•Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries or cause chemical leakage in old batteries.

•Remove batteries as soon as they are worn out. Chemicals that leak from batteries that come in contact with skin can cause a rash. If you fi nd any chemical leakage, wipe thoroughly with a cloth.

•The batteries supplied with this product may have a shorter life expectancy due to storage conditions.

•If you will not be using the remote control unit for an extended period of time, remove batteries from it.

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents LC-C3237U Supplied Accessories09P04-MX-NM For connectionsImportant Information Dear Sharp Customer Additional Safety InformationPrecautions when transporting the TV Child Safety Using an optional bracket to mount the TV Setting the TV on the WallAbout setting the TV angle Attaching/Detaching the StandPower indicator on the front of the television lights Green Using the Remote Control UnitConnecting Antenna Cable Installing Batteries in the Remote Control UnitPreparation AntennasTV Front Part NamesTV Rear/Side Input buttonConnecting a PC Connecting to External EquipmentTurning On/Off the Power Initial SetupWatching TV Sleep Timer Changing VolumeDirect Button Operation Changing ChannelsDigital broadcasting audio mode MTS/SAP stereo modeDirect Button Operation ExamplePress Input again or press a/b to select the input source Press InputPress CC Operating On-Screen Display MenuFor PC input mode Press View ModeYou can select the screen size For HD programsUsing the control panel of the main unit Using the remote controlOn-Screen Display Menu On-Screen Display Menu OperationAdvanced Picture Setting OPC SettingPicture Menu Audio Menu Power Control MenuEZ Setup Setup MenuCH Setup Input SkipPosition PC SetupPC Audio Select Hdmi Auto ViewReset Audio SetupParental Ctrl Parental Control Setting LanguageOn-Screen Display Menu Mpaa Voluntary movie rating system When setting an individual content-based rating itemTV Parental Guidelines RatingCanadian English Ratings How to temporarily release the V-CHIP BlockCanadian French Ratings Reactivating the temporarily released V-CHIP BlockOption Menu Demo Mode Favorite CH Favorite Channel SettingIdentification Software Update Operation Lock OutPress Enter to start updating During the data checking, Checking blinksAfter the screen shown below is displayed, press Remove the USB memory deviceTroubleshooting-Digital Broadcasting TroubleshootingError message about reception of broadcast Problem Possible SolutionSpecifications Optional AccessoryAppendix Model LC-C3237USecret number is PC Compatibility ChartLimited Warranty Calling for ServiceUnit inch mm 15 23/64 Dimensional Drawings394.4 31 47/64 200

LC-C3237U, LC-C3237UT specifications

The Sharp LC-C3237UT and LC-C3237U are part of Sharp's LCD television lineup, known for their vibrant picture quality and user-friendly features. Both models are designed to cater to the needs of home entertainment enthusiasts, offering a blend of performance, technology, and aesthetic appeal.

One of the standout features of the LC-C3237UT and LC-C3237U is their 32-inch screen size, which strikes a balance between compactness and an immersive viewing experience. This size makes them ideal for smaller living spaces, bedrooms, or kitchens where larger televisions might not fit. The high-resolution display provides sharp and clear images, ensuring viewers can enjoy their favorite movies, shows, and games in high definition.

The two models incorporate Sharp's advanced LCD technology, which delivers rich colors and high contrast ratios. This technology enhances the overall visual quality, providing vibrant colors and deep blacks, making it ideal for both dark and brightly lit environments. The viewing angles are also commendable, allowing multiple viewers to enjoy a consistent picture without significant color distortion.

In terms of connectivity, the LC-C3237UT and LC-C3237U come equipped with various input options, including HDMI ports, composite video inputs, and USB ports. This connectivity flexibility allows for easy integration with a range of devices, such as gaming consoles, Blu-ray players, and external storage drives, making it convenient for users to access a plethora of content.

Another highlight of these models is their built-in speakers, which deliver decent audio performance, enhancing the overall viewing experience. However, for those seeking a more cinematic sound, Sharp recommends pairing the TVs with external sound systems or soundbars to achieve fuller audio depth.

The television's design is sleek and modern, featuring a thin bezel that maximizes the screen space, offering a modern aesthetic that fits well with contemporary decor. The LC-C3237UT and LC-C3237U are also designed for energy efficiency, consuming less power without compromising performance, making them environmentally friendly choices.

Overall, the Sharp LC-C3237UT and LC-C3237U are excellent options for consumers seeking quality, features, and value in a compact LCD television. With a combination of advanced technology, multiple connectivity options, and a stylish design, these models provide an enjoyable viewing experience for any room in the home.
Top Page Image Contents