Sharp LC70UD1X Additional features, Wallpaper setting, Boot picture, Illumination, Game play time

Useful viewing functions

Additional features

Option

Wallpaper setting

This function is available only when “Standby mode” is set to “Wallpaper”.

Activating the function will display still images when the TV is in standby mode.

Go to “HOME” > “TV Menu” > “Setup” > “Option” > “Wallpaper setting”.

Data source

For the wallpaper, you can select either the still images pre-installed in the TV or your favourite still images stored in the USB device or SD/SDHC memory card.

Item

Pre-installed	The images pre-installed in the TV will be
	displayed in a slideshow.
	Images stored for the wallpaper will
	appear.
	If only a single still image is stored in
SD/USB	the USB device or SD/SDHC memory
	card, that image will be displayed as the
	wallpaper. When there are multiple still
	images in the memory, all the images will
	be displayed in a slideshow.

NOTE

Timer setting

You can set the length of time the TV will remain in the Wallpaper mode (3 hours/6 hours/12 hours/24 hours).

NOTE

•Setting “Standby mode” to “Mode1” consumes more power.

•No buttons except for awork even while the still images are being displayed.

•If the ready-for-use USB device or SD/SDHC memory card is not inserted, the still images pre-installed in the TV will be displayed in a slideshow even when “Data source” is set to “SD/USB”.

•The still images will be displayed until the set time has elapsed.

•If you do not want to use the wallpaper as described above, set “Standby mode” to “Mode1” or “Mode2”.

Option

Boot picture

With this function activated, the SHARP logo will be displayed when you turn on the TV.

Go to “HOME” > “TV Menu” > “Setup” > “Option” > “Boot picture”.

NOTE

•This function is not available when the “Standby mode” is set to “Mode1”.

Option

Illumination

•Images are displayed as a slideshow in 3-minute intervals.

•As a USB device or SD/SDHC memory card cannot be detected immediately after the TV is turned on from standby mode, the wallpaper pre-installed in the TV may be displayed even when “Data source” is set to “SD/USB”. To display the SD/USB Wallpaper, turn on the power and wait 10 seconds before turning off the power.

•When in the wallpaper function, do not perform any OAD operations or EPG searches.

•A timer set for recording or watching a programme will take priority 2 minutes before the programme starts.

EWhen you display images by using the USB device or SD/SDHC memory card

•Create a folder named “WP” in the root directory of the USB device or SD/SDHC memory card (the first directory when the USB device or SD/SDHC memory card is opened), and store into the folder the still images you want to display for the wallpaper.

•You must insert the USB device or SD/SDHC memory card into the TV before turning off the TV.

•If there are images on the USB device or SD/SDHC memory card but they do not appear on the screen, switch to SD/USB mode and check whether the image files on the USB device or SD/SDHC memory card are shown correctly.

With this function activated, the illumination on the front will be lit briefly when you turn on the TV.

Option

Game play time

This function allows you to display the elapsed time on the screen when “AV mode” is set to “GAME”.

Go to “HOME” > “TV Menu” > “Setup” > “Option” > “Game play time”.

Item

	Under connecting a game console to
On	the TV, the elapsed time is displayed
	in 30-minute increments after you start
	playing a game.
Off	Hides the time.

NOTE

•This function is displayed in the external input mode.

•This function is reset after performing the following operations:

1.When toggling the input.

2.When changing “AV mode”.

51