On-Screen Display Menu
■Updating the Software via the Network
1Press a/b on the Manual Update screen to select "Network Update", and then press ENTER.
•The TV connects to the network and checks for updates.
•To cancel, press ENTER.
Connecting to Internet..
Checking for the latest software version..
Accessing..
Abort
2The current version of the TV and the latest version of software are displayed. To update the TV software, select “Yes”, and then press ENTER.
Latest software version has been found.
A software update is available.
Proceed with update?
Current Version
XXXXXXXX
Latest Version
XXXXXXXX
Estimated Update Time
XX
Update time may change depending on the network environment
Yes | No |
•When a server connection cannot be established or an update is not available, a message is displayed.
If a server connection cannot be established, check the broadband connection and Internet Setup.
Cannot reach the server.
Check the network settings and try again.
OK
The TV does not need to be updated.
OK
3After the update fi le is downloaded, the software update process begins.
Downloading the latest software..
Update Version
XXXXXXXX
30%
Abort
Updating to the latest software..
Update Version
XXXXXXXX
50%
Remote control operation is disabled during update process.
Do not unplug AC cord.
CAUTION
•Do not unplug the AC cord while the software is being updated.
4When the software is successfully updated, a screen is displayed indicating that the update process is completed.
A screen indicating that the update is completed is displayed. 4 seconds later, the TV restarts automatically.
Software update is complete.
Update Version
XXXXXXXX
•If the software was not updated successfully, check the broadband connection and Internet Setup, and then try updating the software again.
Failed to complete update.
Please retry from Software Update menu.
OK
■Updating the Software with a USB Memory Device To check for the availability of a software update, visit http://www.sharpusa.com/products/support/. If you have any questions, please
call 1-800-BE-SHARP (800-237-4277).
CAUTION
•Do not remove the USB memory device or unplug the AC cord while the software is being updated.
•Be sure to properly follow the whole procedure described below, step by step. Otherwise, for example, the TV cannot read the data in the USB memory device and software updating will fail.
1Insert the USB memory device with the update fi le into the USB 1 or USB 2 terminal on the TV.
•When you update the software, use only one USB terminal. Either USB 1 or USB 2 is usable.
or
2Press a/b on the Manual Update screen to select "USB Update", and then press ENTER.
38