Sharp LC-46D78UN Preparation, Antennas, Installing Batteries in the Remote Control Unit

Page 9

Preparation

Antennas

To enjoy a clearer picture, use an outdoor antenna. The following is a brief explanation of the types of connections that are used for a coaxial cable. If your outdoor antenna uses a 75-ohm coaxial cable with an F-type connector, plug it into the antenna terminal at the rear of the TV set.

1.A 75-ohm system is generally a round cable with F-type connector that can easily be attached to a terminal without tools (Commercially available).

2.A 300-ohm system is a fl at “twin-lead” cable that can be attached to a 75-ohm terminal through a 300/75-ohm adapter (Commercially available).

F-type connector

75-ohm coaxial cable (round)

300-ohm twin-lead cable (fl at)

NOTICE F-type connector should be finger-tightened only.

When connecting the RF cable to the TV set, do not tighten F-type connector with tools.

If tools are used, it may cause damage to your TV set. (The breaking of internal circuit, etc.)

Connecting Antenna Cable

F-type connector

75-ohm coaxial cable

Connect the antenna cable to the TV using one of the methods in the illustration as shown (1, 2, 3 or 4).

1Cable without a CATV converter

2VHF/UHF antenna

3Combination VHF/ UHF antenna

Cable TV lead-In

75-ohm coaxial cable (round)

75-ohm coaxial cable (round)

Home Antenna terminal (75-ohm)

Coaxial cable (commercially available)

Home Antenna terminal (75-ohm)

Coaxial cable (commercially available)

 

or

300/75-ohm adapter

300-ohm twin-lead cable (flat)

 

(commercially available)

 

 

 

 

 

 

 

4 Separate VHF/UHF

 

UHF

300-ohm

VHF

ANTENNA

antenna

twin-lead cable

 

 

ANTENNA

 

300-ohm twin-lead cable

or 75-ohm coaxial cable

IN OUT

Combiner (commercially available)

To TV antenna terminal

Installing Batteries in the Remote Control Unit

If the remote control fails to operate TV functions, replace the batteries in the remote control unit.

1 Open the battery cover.

2 Insert two “AA” size batteries

3 Close the battery cover.

 

(supplied with the product).

 

Place the batteries with their terminals corresponding to the (e) and (f) indications in the battery compartment.

CAUTION

Improper use of batteries can result in chemical leakage or explosion. Be sure to follow the instructions below.

Do not mix batteries of different types. Different types of batteries have different characteristics.

Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries or cause chemical leakage in old batteries.

Remove batteries as soon as they are worn out. Chemicals that leak from batteries that come in contact with skin can cause a rash. If you fi nd any chemical leakage, wipe thoroughly with a cloth.

The batteries supplied with this product may have a shorter life expectancy due to storage conditions.

If you will not be using the remote control unit for an extended period of time, remove batteries from it.

9

Image 9
Contents LC-46D78UN LC-52D78UN Supplied AccessoriesFor connections Declaration of Conformity10P06-MX-NM Information Important InformationDear Sharp Customer Additional Safety InformationCaring for the Cabinet Precautions when transporting the TVCaring for the Liquid Crystal panel Child SafetyUsing an optional bracket to mount the TV Setting the TV on the WallAttaching/Detaching the Stand Hanging on the wallPower indicator on the front of the television lights Green Using the Remote Control UnitInsert the batteries into the remote control unit. See Experiencing HD imagesConnecting Antenna Cable Installing Batteries in the Remote Control UnitPreparation AntennasPart Names TV FrontTV Rear/Side Connecting to External Equipment Connecting an Audio AmplifierConnecting a PC Initial Installation Turning On/Off the PowerWhen Air is selected in Antenna setting Watching TVSleep Timer Changing VolumeDirect Button Operation Changing ChannelsDigital broadcasting audio mode MTS/SAP stereo modeDirect Button Operation ⑨ PCPress CC Press InputPress Input again or press a/b to select the input source Displays channel information being viewed. Press DisplayFor PC input mode Press View ModeYou can select the screen size For 43 programsOn-Screen Display Menu Operation On-Screen Display MenuMenu Operation Buttons LcfontOPC Setting Advanced Picture SettingPicture Menu Audio Menu Power Control MenuSetup Menu Reset Auto Sync For Analog PC Input Mode OnlyParental Ctrl Parental Control Setting Fine SyncChip On-Screen Display Menu StatusMpaa Voluntary movie rating system TV Parental GuidelinesCanadian English Ratings How to temporarily release the V-CHIP BlockCanadian French Ratings Exempt programmingOption Menu Digital Setup Menu After the screen shown below is displayed, press Press Enter to start updatingEnter Remove the USB memory deviceTroubleshooting AppendixPages 18 Appendix Troubleshooting Error MessageClearing the Secret Number Secret number isSpecifications Optional AccessoryModel LC-46D78UN Model LC-52D78UN Part name Model number Wall mount bracketInformation on the Software License for This Product PC Compatibility ChartLimited Warranty Calling for Service