Sharp LC-46XL2E, LC-46XL2S Basic adjustment, Picture adjustments, Advanced, Picture Settings

Basic adjustment

Picture Settings

MENU [Picture]

Picture Audio

DYNAMIC

OPC			[Off]
Backlight	[+14]	–16	+16
Contrast	[+30]	0	+40
Brightness	[0]	–30	+30
Colour	[0]	–30	+30
Tint	[0]	–30	+30
Sharpness	[0]	–10	+10
Advanced
Reset

Picture

OPC

Automatically adjust the brightness of the screen.

Item

Off: The brightness is fixed at the value set in Backlight.

On: Automatically adjusts

On:Display: Displays the OPC effect on the screen while adjusting the brightness of the screen.

NOTE

•When set to “On”, the TV senses the surrounding light and automatically adjusts the backlight brightness. Make sure no object obstructs the OPC sensor, which could affect its ability to sense surrounding light.

Picture

Picture adjustments

Adjust the picture to your preference with the following picture settings.

Adjustment items

Selectable	c button	d button
items
Backlight	The screen dims	The screen brightens
Contrast	For less contrast	For more contrast
Brightness	For less brightness	For more brightness
Colour	For less colour intensity	For more colour
		intensity
Tint	Skin tones become	Skin tones become
	purplish	greenish
Sharpness	For less sharpness	For more sharpness

Picture

Advanced

This TV provides various advanced functions for optimising the picture quality.

Colour Temp.
100Hz
Film Mode	High
Active Contrast	Mid-High
3D-Y/C	Middle
Monochrome
Range of OPC	Mid-Low
	Low

Colour Temp.

Adjust the colour temperature to give the best white image.

Item

High: White with bluish tone

Mid-High:Intermediate tone between High and Middle

Middle: Natural tone

Mid-Low:Intermediate tone between Middle and Low

Low: White with reddish tone

100Hz

100Hz technology provides superior solutions for digital display picture quality removing motion blur.

NOTE

•Press DEMO on the remote control unit to show 100Hz demonstration in a dual screen format.

•This effect is greater on fast moving images.

•100 Hz will have no effect in the following cases;

1)The type of signal received is a PC signal.

2)An OSD is being displayed.

3)Teletext is activated.

•If images appear blurred, set the “Film Mode” to “Off”.

Film Mode

Automatically detects a film-based source (originally encoded at 24/25 frames/second, depending on the vertical frequency), analyses it and then recreates each still film frame for high-definition picture quality.

Active Contrast

Automatically adjusts the contrast of an image according to the scene.

3D-Y/C

Provide high quality images with minimal dot crawl and cross colour noise by detecting changes in the image.

Item

Standard: Normal adjustment

Fast: Set the optimum image quality for fast-moving images.

Slow: Set the optimum image quality for slow-moving images.

Off: No detecting

NOTE

•3D-Y/C may not operate depending on the input signal type or noisy input signal.

•3D-Y/C has even more effect on composite video signals (CVBS).

24