Sharp LC-37SV1E, LC-42SA1E, LC-37SA1E operation manual Still image, Teletext function

Still image

You can freeze a motion picture on the screen.

1 Press 3.

2 Press 3 again to exit still image.

NOTE

•When this function is not available, “No still image display available.” will display.

•The still image automatically goes out after 30 minutes.

Time display

You can display the time information included in the Teletext broadcasts.

1 Select a TV channel providing Teletext information. (The time information is automatically captured.)

2 Press p. The channel display will appear on the TV.

3

Teletext function

What is Teletext?

Teletext broadcasts pages of information and entertainment to specially equipped television sets. Your TV receives Teletext signals broadcast by a TV network, and decodes them into graphical format for viewing. News, weather and sports information, stock exchange prices and programme previews are among the many services available.

4 Even when you change the TV channel, you can display the time information with steps 2 and 3 above.

NOTE

•The time display cannot be stored once the power is turned off. When you turn on the power, perform steps 1 to 4 again.

•If acquired successfully, the time information will appear in the upper-right corner of the screen by pressing MENU.

Turning on and off Teletext

1 Select a TV channel or external input source providing the Teletext programme.

2

3 Press magain to display the Teletext on the right screen and normal image on the left screen.

•Each time you press m, the screen switches as shown below.

•If you select a programme with no Teletext signal, “No Teletext available.” displays.

•The same message displays during other modes if no Teletext signal is available.

NOTE

•Teletext will not work if the selected signal type is RGB. (See page 18.)

Button functions