Menu operations
Fine Sync. | PC only |
|
|
Menu Operation: C (page 12)
Ordinarily, the TV automatically adjusts image positions coming from PC (Auto Sync. function). In some cases, however, manual adjustment is needed to optimise the image.
Item
Clock: Adjusts when the image flickers with vertical stripes.
Phase: Adjusts when characters have low contrast or when the image flickers.
NOTE
•If you need to adjust the image position, adjust the position using your PC.
XGA Mode | PC only |
|
|
Menu Operation: C (page 12)
You can select one of the 3 input signals listed below to adjust the picture resolution when the PC input is an XGA signal.
1024 g768
1280 g768
1360 g768
NOTE
•Depending on the graphics card, resolutions of 1360 g 768 may not display correctly.
Position | TV/DTV/AV only |
|
|
Menu Operation: C (page 12)
For adjusting a picture’s horizontal and vertical position.
Item
NOTE
•Adjustments are stored separately according to input source.
•Depending on the input signal type a position setting may not be available.
WSS (Wide Screen Signalling) TV/DTV/AV only
Menu Operation: A (page 12)
WSS allows a television to switch automatically among the different screen formats.
NOTE
•Use WIDE MODE if an image does not switch to the correct screen format. When the broadcast signal contains no WSS information, the function will not work even if enabled. (See page 20.)
4:3 Mode | TV/DTV/AV only |
|
|
Menu Operation: A (page 12)
The WSS signal has 4:3
Item
Normal: Normal range keeping 4:3 or 16:9 aspect ratio
Panorama: Wide image without side bars
WSS signal 4:3 screen
4:3 mode “Normal” | 4:3 mode “Panorama” |
Language
Menu Operation: A (page 12)
You can select a language from the Setup menu. Select from among 13 languages. (Dutch, English, Finnish, French, German, Greek, Italian, Polish, Portuguese, Russian, Spanish, Swedish, Turkish)
Supply Voltage
Menu Operation: A (page 12)
Switch on or off the power to the antenna connected to the antenna input terminal. (See page 4.)
Option menu
MENU [Option]
Option |
Audio Only |
|
DNR | [Off] |
Input Select | [CVBS] |
Colour System | [AUTO] |
|
|
NOTE
•“HDMI Setup” is displayed only when “EXT5” or “EXT6” is selected from the INPUT SOURCE menu.
Audio Only
Menu Operation: A (page 12)
When listening to music from a music programme, you can set the TV off and enjoy audio only.
Item
Off: Both screen images and audio are output.
On: Audio is output without screen image.
18