Sharp LC-32P70E, LC-37P70E Connecting a decoder, Connecting a PC, Using AV Link function

Connecting a decoder

You can use the EXT 1 terminal when connecting a decoder and other audiovisual equipment.

EXT 1

SCART cable*

Decoder

NOTE

•In cases when the decoder needs to receive signal from the TV, make sure to set “Decoder” to “EXT1” in the Programme Setup “Manual Adjust” menu. (See page 16.)

•Do not connect the decoder to the EXT 2 terminal.

Connecting a PC

Use the EXT 4 terminals to connect a PC.

ø 3.5 mm stereo minijack cable*

NOTE

•The cables marked with * are commercially available items.

•The PC input terminals are DDC1/2B-compatible.

•Refer to page 33 for a list of PC signals compatible with the TV.

•Macintosh adaptor may be required for use for some Macintosh computers.

•When connecting to a PC, the correct input signal type is automatically detected.

Using AV Link function

This TV incorporates three typical AV Link functions for smooth connections between the TV and other audiovisual equipment.

One Touch Play

While the TV is in standby mode, it automatically turns on and plays back the image from the audiovisual source (e.g. VCR, DVD).

WYSIWYR (What You See Is What You Record)

When the remote control unit of the connected VCR has the WYSIWYR button, you can automatically start recording by pressing the WYSIWYR button.

Preset Download

Automatically transfers the channel preset information from the tuner on the TV to the one on the connected audiovisual equipment (e.g. VCR) via the EXT 2 terminal.

NOTE

•Refer to operation manuals of each external equipment for the details.

•Only works when the audiovisual equipment is connected to the EXT 2 terminal on the TV with AV Link via a fully wired SCART.

•The use of the AV Link function is only possible if the TV- set has enforced a complete auto-installation with the connected audiovisual equipment (page 8, Initial auto installation).

The availability of the AV Link function depends on the audiovisual equipment used. Depending on the manufacturer and type of equipment used, it is possible that the described functions may be completely or partially unusable.