Sharp LC-70UQ10E Connecting a PC, Displaying a PC image on the TV Selecting the picture size

Connecting a PC

Connecting a PC	Analogue connection
HDMI connection	PC	PC terminal*
PC	HDMI 1, 2, 3 or 4 terminal

			q RGB cable	r ø 3.5 mm stereo
			(commercially	minijack cable
			available)	(commercially
n HDMI-certified cable (commercially available)				available)
PC	HDMI 2 terminal*	PC			PC terminal*

Displaying a PC image on the TV

Selecting the picture size

You can select the picture size.

1Press f.

•The “Wide mode” menu displays.

2Press for a/bto select the desired item.

EXAMPLE

	Normal	Full
	Item
Normal	Keeps the original aspect ratio in a full
	screen display.
Cinema	For letterbox pictures. Bars may
	appear on the top and bottom with
	some programmes.
Full	An image fully fills the screen.

o ø 3.5 mm stereo	p DVI/HDMI cable
minijack cable	(commercially
(commercially	available)
available)

*When using the HDMI 2 terminal, you must select the proper item in the “Audio select” menu depending on the type of HDMI cable connected (refer to page 46 for details).

sDVI/RGB conversion t ø 3.5 mm stereo

cable	minijack cable
(commercially	(commercially
available)	available)

*When using the PC terminal, you must select “Video+Audio” in the “Audio select” menu (refer to page 46 for details).

Dot by Dot	Displays an image with the same
	number of pixels on the screen.

NOTE

• You can also select an item from the “Wide mode” menu

(Page 45).

• Connect the PC before making adjustments.

• Selectable picture size may vary with input signal type.

• You may not be able to change the wide mode while in

NOTE

•For PC-connection via the PC terminal, a cable with ferrite cores is recommended.

•The PC input terminals are DDC 2B-compatible.

•Refer to page 61 for a list of PC signals compatible with the TV.

3D mode.

• Refer to page 45 for AV signals.

HDMI: 480i/480p/576i/576p/720p/1080i/1080p

• The PC terminal is not compatible with 480i/576i/1080p

signals.

59