Sharp LC-60LE831U operation manual Watching TV Antenna & Cable/STB, CH Search Channel search

Antenna & Cable/STB

Select the type of connection you will use to watch TV.

CH Search (Channel search)

Channel auto search makes the TV look for all channels viewable in the set area.

3Press c/d to select "Antenna & Cable" or "Set- top box", and then press ENTER.

5When "Air" is selected in Antenna setting: Press c/d to select "Start", and then press

ENTER.

Antenna & Cable

Set-top box

Start

Cancel

To watch TV via an antenna or cable connection (without using a set-top box): Select "Antenna & Cable", and then go to step 4.

To watch TV via a set-top box:

1 Select "Set-top box", and then press ENTER. 2 To watch TV, select the input source

corresponding to the terminal connected to the set-top box. When doing so, you must make the setting to skip "TV". Press c/d to select "On", and then press ENTER.

•When this is set to "On", the channel on the TV

cannot be changed using the remote control unit or menu. (e.g. CH r/s, Favorite CH, etc.)

•See page 31 for details on the Input Skip function.

3 Press INPUT to select the input source corresponding to the terminal connected to the set-top box. Make the necessary settings on the connected external equipment.

•See the operation manual of the connected equipment for setting up the equipment.

Air/Cable (Antenna setting)

Make sure what kind of connection is made with your TV when selecting "Air" or "Cable".

4Press c/d to select "Air" or "Cable". Press ENTER to enter the setting.

When "Cable" is selected in Antenna setting: 1Press a/b to select "Analog & Digital Search

Start" to search both analog and digital broadcasts, or to select “Analog Search Start” to search only analog broadcasts, and then press ENTER.

Analog & Digital Search Start

Analog Search Start

Cancel

•The Channel search will start automatically.

•To exit the Channel search screen, select "Cancel", and then press ENTER.

2 The Channel search results may include scrambled channels or channels that are not viewable in the set area. Press c/d to select "Yes", and then press ENTER to remove scrambled channels.

Air

Cable