Language: Configures language settings.
Parental: Configures parental settings.
Timers: Sets timers for selected programmes.
Date/Time: Sets date and time.
Sources: Enables or disables selected source options.
Other Settings: Displays other setting options of the TV set.
Using a Conditional Access
Module
IMPORTANT: Insert or remove the CI module only when the TV is SWITCHED OFF.
•In order to watch certain digital channels, a conditional access module (CAM) can be necessary. This module must be inserted in the CI slot of your TV.
•Obtain the Conditional Access Module (CAM) and the viewing card by subscribing to a pay channel company, then insert those to the TV using the following procedure.
•Insert the CAM and then the viewing card to the slot that is located in the terminal cover at the rear side of the TV.
•The CAM should be correctly inserted, it is impossible to insert fully if reversed. The CAM or the TV terminal may be damaged if the CAM is forcefully inserted.
Connect the TV to the mains supply, switch on and then wait for few moments until the card is activated.
•When no module is inserted, “No Common Interface module detected” message appears on the screen.
•Refer to the module instruction manual for details of the settings.
Viewing Conditional Access Menu (*)
(*)These menu settings may change depending on the service provider.
Press “MENU” button and select the icon by using “
” or “
” button. Press OK button to view Settings menu. Use “
” or “
” button to highlight Conditional Access and press OK to view menu items.
English
Configuring Language
Preferences
You can operate the TV’s language settings using this menu.
Press “MENU” button and select the fifth icon by using “
” or “
” button. Press OK button to view Settings menu. Use “
” or “
” button to highlight Language and press OK to continue:
Use “
” or “
” button to set an item. Settings are stored automatically.
Menu: displays the system language.
Preferred
These settings will be used if available. Otherwise the current settings will be used.
•Audio: Sets the preferred audio language.
•Subtitle: Sets the subtitle language. Selected language will be seen in subtitles.
•Teletext: Sets teletext language.
•Guide: Sets the preferred Guide language.
Current (*)
(*)These settings can be changed if only the broadcaster supports. Otherwise, settings will not be available to be changed.
Audio: Changes the audio language for the current channel.
•Subtitle: Sets the subtitle language for the current channel.
Note: If the Country option is set to Denmark, Sweden, Norway , Netherlands or Finland, the Language Settings menu will function as described below:
- 28 -
A01_MB62_[GB]_1910UK_IDTV_TC_PVR_NICKEL17_32942LED_ROCKER | _ | ZIGGO_10075804_50219215.indd 28 | 25.04.2012 13:32:12 |