Sharp LC-32D44E, LC-32D44S operation manual Child Lock, Input Label

Page 19

Menu operations

Lock

You can block the viewing of any channel.

NOTE

•See “Child Lock” for setting PIN.

•When Lock is set to “On” for a channel, “Child lock has been activated.” displays, and the image and sound of the channel are blocked.

•When pressing OK while “Child lock has been activated.” displays, PIN input menu will display. Inputting the correct PIN lifts the child lock temporarily until the power is turned off.

Sort

Channel positions can be sorted freely.

1Repeat steps 1 to 4 in Programme Setup.

2Press c/d to select “Yes”, and then press OK.

3Press a/b/c/d to select the channel you want to move, and then press OK.

4Press a/b/c/d to move it to the desired position, and then press OK.

5Repeat steps 3 and 4 until all desired channels are sorted.

Erase Programme

An individual programme can be erased.

1Repeat steps 1 to 4 in Programme Setup.

2Press c/d to select “Yes”, and then press OK.

3Press a/b/c/d to select the channel you want to erase, and then press OK.

• A message screen pops up.

4Press c/d to select “Yes”, and then press OK to erase the selected programme. All the subsequent programmes move up.

5Repeat steps 3 and 4 until all desired channels are erased.

Child Lock

TV only

Allow you to use a PIN to protect certain settings from being accidentally changed.

Changing the PIN

1Press MENU and the MENU screen displays.

2Press c/d to select “Setup”.

3Press a/b to select “Child Lock”, and then press OK.

Change PIN

Reset

New PIN

 

 

 

 

–

–

–

–

 

 

 

 

 

 

 

 

 

 

Reconfirm

–

–

–

–

 

 

 

 

 

4Enter the 4-digit number as a PIN using 0 – 9.

5Enter the same 4-digit number as in step 4 to confirm.

•“The system PIN has been changed successfully” displays.

NOTE

•To view a locked channel, you must enter a PIN. (See this page and page 27 for locking channels from viewing in analogue TV and DTV mode.) When you select a locked channel, a PIN prompt message pops up. Press OK to display the PIN input window.

Resetting the PIN

Allow you to reset your PIN to the factory preset “1234”.

1Repeat steps 1 to 3 in Changing the PIN.

2Enter the PIN.

3Press a/b to select “Reset”, and then press OK.

4Press c/d to select “Yes”, and then press OK.

NOTE

•As a precautionary measure, make a note of your PIN on the back of this operation manual, cut it out and keep it in a safe place that children cannot reach.

•See page 32 for resetting the current PIN to the factory preset “1234” if you lose or forget your PIN.

Input Label

You can assign each input source a label you like.

1Press b to select the desired input source.

2Press MENU and the MENU screen displays.

3Press c/d to select “Setup”.

4Press a/b to select “Input Label”, and then press OK.

5Press a/b/c/d to select each character of the new name for the input source, and then press OK.

6Repeat step 5 above until the name is fully spelt out, and then press OK.

•The name can be 6 characters or less.

•If a label name is less than 6 characters, select “END”, then press OK.

NOTE

•You cannot change the label if the input source is TV or DTV.

17

Page 18 Page 20
Image 19
Page 18 Page 20
Contents LC-32D44E LC-32D44S Blue Neutral Brown Live Special Note for Users in the U.KContents Trademarks Important Safety PrecautionsPrecautions when transporting the TV Dear Sharp customerScrews m9 Supplied accessoriesQuick guide Attaching the standBundling the cables Setting the TVSetting the TV on the wall AntennaInserting the batteries Using the remote control unitAnalogue TV mode Remote control unitEUsing 2 on the remote control unit DTV modeTV Front view Remote control sensorTV Rear view Using the analogue programme list Turning on the powerStandby mode Initial auto installation AnalogueConnecting a game console or camcorder Using external equipmentConnecting a VCR Connecting a DVD playerConnecting a PC Connecting a decoderUsing AV Link function On-Screen Display Operation without a remote controlMenu operations Menu operation buttonsMenu Operation B Common operationsMenu operations Menu Operation aPicture menu Picture adjustmentsAV Mode Adjustment itemsAdvanced Audio adjustmentsAudio menu Setup menu Power Control menuNo Signal Off Power ManagementAuto Search Programme SetupManual Adjust You can adjust the frequency to your desired positionInput Label Child LockFine Sync XGA ModePosition ModeColour System Hdmi SetupDNR Digital Noise Reduction TV/DTV/AV only Input SelectAuto Selection Useful featuresMode menu Manual SelectionTeletext function Still imageDTV common operations DTV menu operationsDTV menu operation buttons DTV On-Screen DisplayDTV menu operations Skip DTV menu operations FavouriteMove To LockAuto Installation InstallationCarrier Scan Configure On-Screen Display and Child Lock settings Carrier SetupSystem Setup OSD SetupSoftware Version AccessoriesSoftware Upgrade Child LockCommon Interface Supplying power to the antennaInserting a CA card About EPG Useful features DTVUsing the EPG Using the EPG TimerUseful features DTV Using the ESGUsing the digital programme list Viewing a service bannerSample MHEG5 screen Using the multi audio functionUsing the MHEG5 application UK only Displaying subtitlesProblem Possible Solution TroubleshootingAppendix RS-232C port specifications PC compatibility chartAppendix Rating table for Child Lock Appendix CommandsUniversal Part name Part number SpecificationsOptional accessory 32o LCD Colour TV, Model LC-32D44E, LC-32D44SInformation on Disposal for Business Users European Union Other Countries outside the EULC-32D44E/LC-32D44S 08P02-PL-NG Sharp Corporation
Related manuals
Manual 40 pages 18.04 Kb

LC-32D44E, LC-32D44S specifications

The Sharp LC-32D44S and LC-32D44E are versatile flat-panel LCD televisions that cater to viewers seeking a blend of style and functionality. Both models are well-regarded for their impressive display quality and user-friendly features, making them a strong choice for any home entertainment setup.

One of the standout features of the LC-32D44S and LC-32D44E is their 32-inch screen size, which is perfect for smaller rooms without compromising on the viewing experience. The high-definition display boasts a resolution of 1366 x 768 pixels, delivering vibrant colors and sharp imagery that enhance movie nights, gaming sessions, or binge-watching of your favorite series. The panel technology ensures consistent brightness levels and broad viewing angles, allowing everyone in the room to enjoy the action without any loss of quality.

Both models come equipped with multiple connectivity options, making it easy to connect to various devices. HDMI ports allow for seamless attachment to Blu-ray players, gaming consoles, and streaming devices, while USB ports enable users to play media files directly from flash drives or external hard drives. Additionally, the integrated digital tuner allows for access to a wide range of Freeview channels, enhancing the television's functionality without the need for an additional set-top box.

In terms of sound technology, the LC-32D44S and LC-32D44E feature built-in speakers that provide clear audio output. However, for those who desire a more immersive audio experience, the televisions support external sound systems through their audio outputs.

Design-wise, both models embody a sleek and modern aesthetic that complements any décor. The ultra-slim bezels maximize the screen space, creating an elegant look that is both stylish and practical.

Energy efficiency is another characteristic that makes the LC-32D44S and LC-32D44E appealing. They operate at lower power consumption levels, making them an environmentally friendly choice.

In summary, the Sharp LC-32D44S and LC-32D44E televisions combine modern aesthetics with advanced technology, making them suitable for diverse viewing needs. With their impressive display, ample connectivity options, and stylish design, these models stand out as solid choices in the realm of compact LCD televisions.
Top Page Image Contents