Setup menu (Continued)
4Press a/b to select “Change password”, and then press ENTER.
5Enter the
Change password | Enter your new password. Use 4 digits |
|
|
4Reset
New Password |
| – | – – – |
Reconfirm |
|
|
|
| – – – – | ||
6Enter the same 4-digit number as in step 5 to confi rm.
NOTE
•To view a locked channel (Lock setting in Programme Setup “Manual Adjust” is set to “On”), you must enter a Password. When you select a locked channel, a Password prompt message pops up.
•Press ENTER to display the Password input window.
Resetting the Password
Allow you to reset your password.
1Repeat steps 1 to 3 in Setting a Password.
2Press a/b to select “Reset”, and then press
ENTER.
3Press c/d to select “Yes”, and then press
ENTER.
HPosition
For adjusting a picture’s horizontal and vertical position.
Selected item | Description |
|
|
Centres the image by moving it to the left | |
| or right. |
|
|
Centres the image by moving it up or | |
| down. |
|
|
HWSS
WSS allows a television to switch automatically among the different screen formats.
NOTE
•Try to set WIDE mode if an image does not switch to the correct screen format. When the broadcast signal contains no WSS information, the function will not work even if enabled.
•Not available for COMPONENT signal.
H4:3 Mode
The WSS signal has 4:3
Selected item | Description |
|
|
Panorama | Wide image without side bars |
|
|
Normal | Normal range keeping 4:3 or 16:9 aspect |
| ratio |
|
|
WSS signal 4:3 screen
4:3 mode “Panorama” | 4:3 mode “Normal” |
HOutput Volume Select
Allows you to select what controls the audio output.
Selected item | Description |
|
|
Fixed | • Sound via speakers is adjusted with |
| VOL k/l on the remote control unit |
| or the TV. |
| • Sound via the OUTPUT terminal is not |
| adjustable and constantly outputs. |
|
|
Variable | • Sound via the OUTPUT terminal |
| is adjusted with VOL k/l on the |
| remote control unit or the TV. |
| • Sound via speakers is muted. |
|
|
NOTE
•The “Audio” menu cannot be operated when “Variable” is selected.
HLanguage
You can also select a language from setup menu. Select from among 8 languages: English, Simplifi ed Chinese, Traditional Chinese, Arabic, Thai, Persian, French and Portuguese.
HText Language
Select from among 4 kinds of language tables: West Europe, East Europe, Greek/Turkish, Cyrillic.
NOTE
•Teletext can display only when it is sent by a network. Not used to convert between languages.
HInput Label
You can assign each input source a label as you prefer.
1Press TV/VIDEO to select the desired input source.
2Press MENU and the MENU screen displays.
3Press c/d to select “Setup”.
4Press a/b to select “Input Label”, and then press ENTER.
5Press a/b/c/d to select each character of the new name for the input source, and then press ENTER.
6Repeat until the name is fully spelt out.
•The name can be 6 characters or less.
•When you want to set an input source name of less than 6 characters, select “END”, then press ENTER to exit from the labelling menu.
NOTE
• You cannot change labels if the input source is TV.
Setup menu (Continued)
H HDMI Setup (HDMI input mode only)
1Repeat steps 1 to 3 in Input Label.
2Press a/b to select “HDMI Setup”, and then press ENTER.
3Press a/b to select “Auto View” or “Audio Select”, and then press ENTER.
4Press c/d to select the desired item, and then press ENTER.
HDMI Setup | Description | |
items | ||
| ||
|
| |
Auto View | Set whether or not to use WIDE MODE | |
| based on signal recognition, including an | |
| HDMI signal. | |
|
| |
Audio Select | Select “Digital” for audio signal via the | |
| HDMI terminal. Select “Analogue” for | |
| audio signal via the AUDIO jack. | |
|
|
HInput Signal (PC input mode only)
•Some input signals may have to be registered manually to display properly.
•The pairs of input signals (resolutions) in the list below are not distinguishable when received. In such case, you have to set the correct signal manually. After setting once, it will display when the same signal (resolution) is input again.
1024 g 768 1280 g 768 1360 g 768
Option menu
MENU [Option]
Setup | Option |
|
| Audio Only |
|
| DNR | [Low] |
| Colour System | [Auto] |
1Press MENU and the MENU screen displays.
2Press c/d to select “Option”.
3Press a/b to select the desired menu, and then press ENTER.
4Press a/b or c/d to select the desired item. Press ENTER if necessary.
HAudio Only
When listening to music from a music programme, you can set the display off and enjoy audio only.
Selected item | Description |
|
|
On | Audio is output without screen image. |
|
|
Off | Both screen images and audio are output. |
NOTE
•When you make operations that change the picture on the TV such as by changing the input source, the Audio Only function is set to “Off”.
HDNR (Digital Noise Reduction)
Reduce noise on the screen and produces a clearer video image. (Off, High, Low)
HColour System
You can change the colour system to one that is compatible with the image on the screen. (Auto, PAL, SECAM, NTSC 3.58, NTSC 4.43,
NOTE
•If “Auto” is selected, colour system for each channel is automatically set. If an image does not display clearly, select another colour system (e.g. PAL, NTSC 4.43).
•“Colour System” is selectable only when inputting an
Picture and still image
You can freeze a motion picture on the Display.
1Press FREEZE.
•A still image displays.
•The still image is one frame captured from a moving image at the moment you press FREEZE.
2Press FREEZE again to exit still image.
NOTE
•The still image automatically goes out after 30 minutes.
•FREEZE doesn’t function for PC input (all resolution). “No still image display available” message will appear.
Wide Mode
Manual Selection
You can select different picture sizes that account for the kind of each picture.
1Press WIDE.
•The WIDE MODE menu displays.
•The menu lists the wide mode options selectable for the type of video signal currently received.
2Press WIDE or a/b while the WIDE MODE menu displays on the screen.
•As you toggle down the options, each mode is immediately refl ected on the TV.
Auto Selection
If you set “WSS” and “4:3 Mode” in the Setup menu, the optimum WIDE mode is automatically chosen for every broadcast containing the WSS information.
“WSS” menu
To enable Auto Selection, set “WSS” in the Setup menu to “On”. (See page 11.)
11 | 12 |